Counting matching models…
Wanted a smallish funnel for my salt and pepper mill (Zassenhaus brand). 26 grams of filament print with the wide bit at the bottom design is in mm's (slicer asked about it) printed on basic settings
These salt & pepper shakers use a base of PETG or PLA, with the black or white handle in TPU. Use sea salt and peppercorns. The internal grinding mechanism is https://www.crushgrind.com/products/crushgrind-shaft 123 mm version. The…
Adapter to connect a WMF grinder to a glass with standard thread, for best durability print with PETG. For best results print the bigger diameter on the printbed.
My buddy wanted a salt and pepper shaker holder to go on his side table. It has a mounting point in the center to screw the holder down to his table. On the back side it also has a small clip for him to put notes or letters of importance.…
Wanted a smallish funnel for my salt and pepper mill (Zassenhaus brand). 26 grams of filament print with the wide bit at the bottom design is in mm's (slicer asked about it) printed on basic settings
Model has approximately 7cm tall and 3,7cm of diameter Printing notes Layer height: 0.12 mm Infill: 25%
Funnel for a Battery operated Salt and Pepper. Base diameter is 33mm to fit inside the salt/Pepper Vessel. print with the large opening on the baseplate.
Just a quick print to add a shaker lid to the larger glass ground pepper containers you can buy at Sam's Club. The container lid still fits as well. The shaker lid friction fits with a little pressure. Happy cooking!
Einfacher und schnell zu druckender Untersetzer für Salz- und Pfeffermühlen der Marke Peugeot (6 cm Durchmesser). Nach Gebrauch krümeln die Gewürzmühlen oft noch etwas. Damit nicht die halbe Küche vollgekrümelt ist, haben die Mühlen jetzt…
How to print: Start with white filament, then switch to black. Add pauses before printing in your slicer.
Funnel to fill the Männkitchen mills. Diameter at the lower end is 44mm. I belive the pepper canon has an internal diameter of 44.4mm, so you could go even slightly bigger if your tolerances allow. I opted for 44mm as that allows the…
Practical holder (menage) for a salt and pepper mill – ideal for the kitchen or dining table. The mills stand securely and neatly next to each other and are always within reach. I printed the cruet set using extrudr PLA NX2 MATT . For…
Meet Pepper Punk, the bell pepper who woke up on the wrong side of the salad. He’s squat, stocky, and permanently mid–pep talk (“put ’em up!”). Park him on your desk for instant sass, guard your spice rack, or drop him into a tabletop…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A small bowl that looks like Spaghetti. It comes with meatball salt and pepper shakers! A cute little addition to…
Update 27.1.2026: Added a longer barrel axle to the root, this is about .5mm longer than the original so it should sit perfectly flush instead of under tension like the old one. This might result in a loss of performance. If you dont want…
Deutsch: Praktische Halterung für drei Russell Hobbs Pfeffermühlen. Diese Halterung bietet Platz für bis zu drei Russell Hobbs Pfeffermühlen und sorgt für Ordnung und elegantes Design in Ihrer Küche. Gedruck aus PLA und TPU-Boden,…
Just print in TPU, No support needed. If you want, You can add a stop to the print and change color to black, To make a stripe that will help you distinguish between salt and pepper. Please let me know how you enjoyed it or if printing…
A TPU gasket for helping seal the Wiley-X SG-1 glasses against chemical agents such as teargas or pepperspray. The SG1 glasses/goggles are great for ballistic protection for protestors/observers, and are one of the only ballistic glasses…
This salt and pepper dispenser holder is designed to keep your countertop clean by catching the leftover salt and pepper that often falls out of grinders after use. While many holders like this already exist, the main difference here is…
Dr Pepper and Diet Dr Pepper Folding Door Display Box The Dr Pepper Folding Door Display Box is a compact display case inspired by the classic soda brand. It features a segmented folding-door mechanism that opens smoothly to reveal the…
Pièce de rechange pour le hachoir Alessi. La paroi du fond a été épaissie par rapport au modèle original pour réduire la flexibilité. Spare part for the Alessi mincer. The bottom wall has been thickened compared to the original model to…
Romantic heart model designed for Valentine’s Day. Perfect as a decorative piece or small gift. Designed to be easy to print and suitable for beginners. It can be refilled through the holes in the back (use the caps to close them). 🖨…
This wall mountable rack for three usb charged gravity pepper mills comes in two parts for easy printing and assembly.
Adapter to connect a WMF grinder to a glass with standard thread, for best durability print with PETG. For best results print the bigger diameter on the printbed.
The Pepper in a Can Challenge is a classic test of indoor gardening - growing a productive pepper plant in the limited root space of a soda or beer can. It’s perfect for winter growing, but cans are notoriously unstable, prone to leaking,…
Replacement Lid for the WMF Trend Spice Mill. I recommend printing it upside down as its creates a cleaner inner surface which make cleaning easier. Supports are generally required, as it has a slightly curved top. Happy Printing!
Holds the large Salt and Pepper grinders. The middle is convex, so the grains that build up are easy to clean
The hat will have to be glued on or otherwise secured. arms made with Tinker Cads basic connectors should snap together. Originally printed on the AD5X. Supports Required. Single Color Print Inspired by LAM.
These salt & pepper shakers use a base of PETG or PLA, with the black or white handle in TPU. Use sea salt and peppercorns. The internal grinding mechanism is https://www.crushgrind.com/products/crushgrind-shaft 123 mm version. The…
'Working' prop of the Villiers 9mm Pepperbox Pistol , our "hero's" sidearm from Disco Elysium. Pull the trigger to drop the hammer, manually advance to the next round. Note: The barrels do not revolve when pulling the trigger. Early…
The Ultimate Pepper Seedling System. Get your Pepper season started right with this optimized 3D-printed starter kit. Designed specifically for young pepper plants, this system focuses on pepper root development and easy maintenance.…
Print - Print Orientation: Print flat with the holes facing up. This gives clean holes, avoids internal supports, and improves fit. Material: PETG recommended for moisture resistance. PLA+ acceptable for dry salt only. Avoid ABS and TPU.…
Printed In Elangoo Hyper Pla plus on my Ender 3v2 took abot an hour :)
Thanks to download & ❤. This caddy is designed to fit these salt & pepper grinders: https://www.printables.com/model/1611093-salt-and-pepper-grinders-with-tpu-knobs If you're liking these colors, the filaments are Prusament PETG pistachio…
It is a salt/pepper shader formed as a sheep. It is hollowed to be filled with salt or pepper, which can be poured of the nose. I've printed a pig salt shaker for my brother and now it gets a sheepy pepper counterpart :) Unfortunately the…
This Minimalistic Salt & Pepper Shaker set is designed to blend seamlessly into modern kitchens while remaining highly functional. Each shaker features a simple cylindrical form, measuring 86 mm in height and 30 mm in diameter , offering…
Small holder for a pepper grinder so you don't get pepper everywhere. Has a depression in the middle to catch pepper.
Use tree supports. A small articulated desk buddy inspired by a bell pepper. The model features movable legs connected with print-in-place joints, allowing simple posing and interaction. The arms are fixed, while the rounded pepper shape…
Keep your dining table and kitchen counter organized with this simple, functional, and stylish salt and pepper shaker holder. Dimensions: Each compartment is designed to fit square shakers with a maximum size of 47 x 47 mm . Key Features:…
Salt and Pepper Shaker with Handle A simple salt and pepper shaker with a handle that is easy to print and can also be customized afterwards. I printed and tested the model myself successfully. Files Included are: a 3MF file for direct…
Coaster & Transport lock for Peugeot Salt & Pepper Mills to avoid mess on the table and on the way to the table ;)
Percy de Rolo's Pepperbox from the show the legend of vox machina: includes an (untested) racheting mechanism to turn the barrel while cocking the hammers. the Stl is uploaded in a single file, but with the use of slicer tools (such as…
A simple Caddy / Holder for IKEA CITRONHAJ dispensers and spice mills. For the handle to thread in correctly you have to calibrate your printer to some degree. Print Suggestions: PETG reccomended; Central Stem >50% infill, aim for good…
Object description: This is an insert for a Fuchs pepper shaker. The model includes a 0,4mm thick support layer which should be printed in a different material as the main part. It is divided into two halves to make it easier to remove.…
Used to store generic salt and pepper holders you can get at almost any store.
Should probably fit any pepper mill with a ø25 mm opening. Print in vase mode with 2 walls
Doporučuji vytisknout logo Dr Pepper jinou barvou aby, byl tisk hezky barevný. Hlavní využití tohoto víčka je ochrana před vlítnutím vosy do plechovek. Velikost tohoto víčka je pro normální plechovku piva.
Made as a birthday gift. The model consist out of two parts, these can be assembled and fixed together by a m2x8 bolt and m2 nut.
Salt & Pepper Funnel to help refill shakers. This was designed to fit Cole&Mason electric Grinders but may fit others.
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- If you’ve been struggling with a loose lid on your salt and…
I wanted a pepper mill funnel to simplify the refilling of peppercorns. Diameter smaller end: 26.5mm Diameter bigger end: 60mm Recommended to print it with a brim on the bigger end. --------------------------------------------- Ich wollte…
A Simple drop in replacement barrel for the dart zone solo, still folds up neatly. The barrels need to be indexed manually but they have a little clicky stopper inside to make sure you dont stop halfway. Needs an O-Ring (Size #9, if that…
Pair of salt and pepper shakers designed to mesh together and turn as gears upon their stand. The bottom is threaded to fill the shakers. Enjoy and happy printing! :-)
most basic salt pepper shaker with storage container for multiple shakers in pattern of honeycombs. Also with optional handlebar which you can simply glue on I recommend definitely scaling all objects up since it is pretty small, I was…
Introducing the Connectable Salt and Pepper Shakers with screw-on tops, a perfect kitchen duo designed for convenience and style! These two shakers can be connected side by side or one over the other, keeping your salt and pepper within…
Small funnel for refilling peppercorns in the Peugeot Isen pepper mill. Should probably work with other Peugeot mills. It's a fantastic grinder, but refilling it is always a pain (without this funnel). Two versions are included, one with…
I got these for my girlfriend for her birthday, she is currently using some very cheap ones, and they are…not so good. WARNING! Be careful if your probe for your Z offset is magnetic! I have a metal tip on my S1 Pro and the magnets will…
This is a cap for those disposable pepper grinders to allow refills. The disposable Kirkland pepper grinders we get at Costco last a while. Unfortunately, it's not possible to refill them. This cap allows sealing the container after…
Tired of always having to dust away salt and pepper from your counter after using the grinders?
Dostal jsem jako dárek originální mlýnek na pepř ve velikosti bejzbolové pálky, ale nástěnný držák byl moc tenký, tak jsem vytvořil nový. I received the original baseball bat size pepper mill as a gift, but the wall mount was too thin, so…
Mount for bike bars holds most 2oz pepper sprays
Replacement bushing for a medium sized Le Creuset Pepper Grinder
Another jibbitz for crocs. Red and White PLA with MMU3. .15mm/layer, 100% infill with ironing, organic supports. Thanks to @Wprints_1300898 for the STLs. P.S. I used transparent red - really makes it pop. :-)
Really easy to print with and without support. For anyone who is to lazy to fill the pepper mill only with a spoon.
It is a model that replaces the motor in your pepper maker. The material you want printed with supports filling 60%
A simple lid which fits to cover the outlet of common electric or handdriven salt-/peppermills.
Printed with polymaker polyterra marble. 0.4 mm nozzle 0.2 mm layer height
thes salt and pepper shakers fetchers snas as the salt and pappyrus as the pepper
Other models for the same device are for example: https://www.printables.com/model/224474-lidl-silvercrest-saltpepper-mill-final-drive-gear/remixes https://www.printables.com/model/608911-deckel-fur-salz-pfeffermuhle-lid-for-salt-pepper-m…
My buddy wanted a salt and pepper shaker holder to go on his side table. It has a mounting point in the center to screw the holder down to his table. On the back side it also has a small clip for him to put notes or letters of importance.…
A simple funnel to fill our Peugeot Paris pepper mill. The dimensions are ~84×63×47 mm. 1.5 mm thick walls.
Pepperoni Pizza Keychain (Multi Color, Single Extruder) Up next in my multi color, single extruder series is a pizza keychain. Print one as a keychain or two as earrings or make it bigger for a christmas ornament. Have fun with it! If you…
Need a display for all those hot sauces that you're collecting? Luckily we have just the thing! This 3D printed sauce holder was designed to display all of your favorite sauces in order of heat level. Milds in the bottom and hotter as you…
Holes in cup 2mm(H) 2,5mm(I) and 3mm(J). Jars diameter cca 40mm, volume cca 80-90ml. Walls thickness 2mm. For salt recomended J2 cup, for pepper H2. Filament need for shaker (jar with cup) cca 12m. Tested PLA 0,2mm, random seam. Spice…
Holes in cup 2mm(H) 2,5mm(I) and 3mm(J). Jars diameter cca 40mm, volume cca 80-90ml. Walls thickness 2mm. For salt recomended J2 cup, for pepper H2. Filament need for shaker (jar with cup) cca 12m. Tested PLA 0,2mm, random seam. Spice…
You'll have to paint it yourself, but here's a model of a personal defense style pepper spray can.
Simple salt and pepper holder. Holes are 53mm in diameter and 3mm deep. Printed with Prusament PLA Prusa Galaxy Black.
This model requires 2 parts pressed together to create a peppermint. Photo shows model printed at 60%. 60% model required light wacks to secure together.
A bell pepper for pretend play, no supports needed. Colors used- Polymaker Polylite Wine Red PLA, Polylite Green PLA and Panchroma Mars PLA
salt and pepper shaker put salt in one side pepper in other twist to open and close
Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…
A tray to store your salt and pepper mills. Designed around the Cole & Mason Derwent Pepper Mill Set. Slots measure 64mm in diameter. BOM: Round Silicone Cabinet Door/Drawer Stoppers, 12 mm x 4 mm (4 units for feet)
Printed with PLA, no supports. Designed to keep your kitchen clean.
a small stand to show off two Chef'n Designer Mills for Salt/Spice/Pepper/etc. In my case, as a present to be used for non-standard peppers. Printed with Extrudr-FLAX and letters printed in Extrudr-NX2 PLA. The .3mf includes a…
EN: The great design by drbakker did not fit my WMF mills. I therefore adapted it. To save time, I set a layer height of 0.2 mm (0.3 would have been too rough for me). However, this means that if you place the thing with the wide opening…
