SAAB 9-3 K989 body
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a self-designed body for a WL-toys K989 rc car. The design is based on the SAAB 9-3 sportscombi but with a…
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 271
- Wydruki
- 2
- Wyświetlenia
- 3088
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a self-designed body for a WL-toys K989 rc car.
The design is based on the SAAB 9-3 sportscombi but with a wide bodykit to fit the dimensions of the K989 chassis and a Hirsch inspired wing in the back. I modeled the body in blender with some 9-3 blueprints as a guide to get the dimensions of the car as proportionate as possible.
The body is held in place with magnets and a custom designed body post.
The lights are 3mm diodes that are powered by the battery that powers the car.
The main body parts are printed standing on the Ender 3 Pro and then glued together.
Front and rear lights are printed in clear PETG while the rest of the body is printed in PLA. However the body can be printed in PETG as well.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0,15
Infill:
25%
Filament: Addnorth PLA Black Post-Printing =============
Some sanding will be required to get the fitment perfect with the K989 wheels and also to smooth out any artifacts from the printing and the gluing.
As shown I did not have patience to smooth out all artifacts but I am happy with the finished result.
Category: R/C Vehicles