Liczymy pasujące modele…
Saab 96 two-stroke keychain. Plain and simple. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Filament: Addnorth PETG Category: Keychains
A simple model to repair the parcel shelf straps (part number 4388518 saab). Need to be printed in flexible material. 3 Perimeters at least. 5-6 if you want to do more resistant. If you don't have a 3d printer you can buy the piece here.
A simple coaster with SAAB automobile logo. The grid pattern is inspired by the grille of Saab 900.
I did flocking to finish mine - looks close enough to original to me Width should be 190 mm
Just button for cup holder , mine was broken so I have done new one.
Stencil to align the crankshaft when doing the timing belt. Amazon tools accuracy was awful so I did my own.
These were made for a Saab 9-3 TTiD 2011 to keep the freshly painted fenders from getting ruined right away. I don't know exactly which model years they fit, but they fit at least these latest manufactured model years. These aren't…
The nipple to connect the crankcase ventilation to the intake in my Saab 9-5 B205E broke while doing some maintenance. I printed a new one to reconnect the pipe. Notes: You will need to connect a hose from the valve to the new nipple.…
Hello. First of all. I made this for me, but I think this can be useful to other saabists. Wanted to put a 1 din stereo and cupholder without paying for OEM cupholder. DISCLAMER: This design have a flaw, and it is the right stalk touch…
can be printed together the model needs to be glued together or separately in other colours the Gripen is very realistic Print in place kit card , Assembly required need to use a support
Print with TPU or TPE. Use stainless steel M5 bolt and nut. 100% infill. Printing orientation.
Clip replacement for saab airbox Print with heat resistant non creep material. (Avoid nylon) You can use for example PC-ABS / Pcblend. You can put lacker on top to protect against chemicals/oil/gas Print with 0% infill , 6-7 perimeters.…
Simple and prints quickly (~10 minutes on my printer). This keychain is based off of a picture I took of my buddy's car so dimensions may be off slightly. About 3 1/8" x 1" x 1/8" for the original model sizing however should scale nicely…
Dimensioned in inches. Printing in ABS, Tough Resin, or another functional material (ideally with slight flexibility) is recommended. Please note that the clip may scuff the paint on your valve covers due to the tight tolerances needed to…
The glovebox handle for a 1972 SAAB Sonett. May match the glovebox handle on other model years. Due to tight tolerances, shorter screws (3/8 in. long) than standard are highly recommended. Do not use a brittle material, as the threads…
An adapter ring from 3,5" to 3#, made for a SAAB 9-5 for the dashboard speakers but fits others. Drill the holes afterwards for your new speaker, maybe I'll add another model with holes but I believe there are different measurements…
USE AT OWN RISK! I only needed to go up to about 10psi before the pressure was gone because of the leak. m6x1.0 thread in a schrader valve (thread designed in one of the plugs), pressurise the boost pipes (and intake pipes because I'm…
A wire frame model of the Saab J35 Draken. Highly inspired by LimaMike3D LimaMike3D He just lacks Swedish vintage jets :) Line thickness is adapted to printing on a 220x220 print bed. Scale to suit. Printing: I used black PLA with 3 walls…
These are meant to replace the covers that protect the screws on the newer GM radios. Recommended ABS to print.
For Saab 9-5 Cup holder adapter made with TPU to fit slim cans. Basically just extends the cup holder’s rubber bits to grab onto smaller cans Printed with organic/tree supports.
This is the legendary SAAB JAS 39 grippen, competitor to the euro fighter, this will intercept you any time
A simple coaster with SAAB automobile logo. The grid pattern is inspired by the grille of Saab 900.
Replaces the passenger side handle on the SAAB 9-3 center console. This is only the top part that snaps into place with no screws needed. Should fit all 2nd generation 9-3s. Printed on an Ender 3 V2 Neo Printable vertically with no…
Adapters using original mounting for 6.5" speakers in doors and adapters for the 3.5" speakers in the dash. I could not find adapters so I made my own. For cars that don't have the door speakers installed from factory. Cables are…
Are your car keys feeling lonely? Or do you want a silhouette of your car? Look no further! Add a nice-looking keychain or a silhouette of the sporty and stylish SAAB 93. 0,4 nozzle 0.2mm layer, 2 walls No support needed. I printed it…
This tool replaces part number 83 93 365 (8393365) and helps with removing the fuel sender unit on a SAAB 900 Turbo. It's designed to be used with a 1/2" ratchet and an extension. I recommend printing it with 100% infill, especially if…
When replacing the original SAAB 900 fuel sender with a Scandix replica, the original plug no longer fits — you'd normally have to cut and replace it. To keep the original wiring harness intact, I designed this housing. It allows you to…
Not sure what happened to my original, but I modelled this one after my remaining example. You can buy them online, but this was a good learning experience. This example is printed on a textured plate with basic PLA and no supports .…
i printed it in 0.15 layers body should be 6mm wide and wings 4mm thick . 200mm long in total. also a base for it to sit in. CA file of the rough edges on the wings and glue them on to the body.
Wanted to make a saab, made a saab. Does require a bunch of supports. Can be enlarged as big as youd want. I printed this on the voron 0.2R1 from PETG
Experiment in tracing a picture and converting it to a 3d model. Printed on Prusa Mini using Prusament PETG with 15% infill at 0.20 layerheight, no support needed. Approximately 15 min printtime.
This is a clamp that is inserted into the body and attaches the rear light of a Saab
My bushing disintegrated into gooey mush, so I designed a replacement. The bushing is for where the vacuum line coming from the brake booster goes into the intake manifold, as pictured. This works for the B201C 2.0L SOHC engines in the…
A car window guide roller, designed specifically for the Saab 900 9-3 9-5. 3D-printed from durable, abrasion-resistant plastic, this component allows for smooth movement of the window in the guides and replaces the original part. An ideal…
This is a self-designed body for a WL-toys K989 rc car. The design is based on the SAAB 9-3 sportscombi but with a wide bodykit to fit the dimensions of the K989 chassis and a Hirsch inspired wing in the back. I modeled the body in…
Replacement part for the Saab 9-5 automatic shifter console . This is the sliding roll cover located directly under the gear selector lever (the straight forward-back type shifter). The original part often breaks or gets stuck over time.…
Key-chain with SAAB and Hirsch. Print upright, use brim if needed. Gyroid infill V2 have deeper cut for less ringing I'm new with CAD and still learning, support my journey by downloading and comment my designs
Saab 9-3 keychain, double sided Print upright and use brim if needed V2 have deeper cut for less ringing I'm new with CAD and still learning, support my journey by downloading and comment my designs
Saab 9-5 keychain, either with Sedan or SportCombi and SAAB on the other side I'm new with CAD and still learning, support my journey by downloading and comment my designs
Saab JAS 39 Gripen Fighter jet Wall Art Silhouette model. Adjustable size. I accept model suggestions.
A custom 2DIN radio adapter frame for Saab 9-5 (pre-facelift & facelift), modeled directly from a 3D scan of the dashboard for a precise OEM-style fit . This model uses hidden 5 mm neodymium magnets for mounting. No drilling, no brittle…
cool plane. should print without any supports except for the engine intakes, but most parts will most definitely need brims or rafts. especially the wings. civilian version coming soon (Bombardier G6000) no clue what else to put here lmfao
A Hercules inspired by the classic SAAB 900 rim. With nice grip and and position indicator. Prints in 3 pieces for a single color print. The inner part is best to be two colored by layer change for the lighter top and darker bottom…
Did not want to buy complete hose set OEM 5230495 for 140 euro so took it into my own hands and made a quick adapter and took a normal 10mm festo pneumatic hose and pressed on. You need to remove all the hose from the one-way valve since…
I did flocking to finish mine - looks close enough to original to me Width should be 190 mm
Just button for cup holder , mine was broken so I have done new one.
I needed a speaker adaptor for my aftermarket woofers, as they were larger and deeper than the factory units. I 3D scanned the original part and modelled the adaptor over the top of it. Attached is the STEP file, which includes both the…
Stencil to align the crankshaft when doing the timing belt. Amazon tools accuracy was awful so I did my own.
A classic cars aficionado asked me to recreate the broken heater manifold of one of his Saab 900. The purpose of this part is to conduct hot water, with temperatures that will surely reach 80º C, so it must be printed using a material…
A friend, who is a classic cars aficionado, asked me to recreate the missing gutter caps of his beloved Saab 900. Print Settings Supports: Yes Category: Automotive
These were made for a Saab 9-3 TTiD 2011 to keep the freshly painted fenders from getting ruined right away. I don't know exactly which model years they fit, but they fit at least these latest manufactured model years. These aren't…
I 3D scanned the badge for someone in the community who wanted it on their boot handle trim. Its curved to match the boot trim handle
I saw a wheel on a Saab show car SAAB wheel is 1:1 full scale 500mm. Fan-Wheel-2 has been edited to be thicker for printing at 75mm (To fit 1:10 scale R/C car tires) Computer Aided Design Files by Onshape
SAAB 9-5 Sliding roller window lift. Fits on SAAB 900 1994-1998 SAAB 9-3 1998-2002 SAAB 9-5 1998-2010
Saab 9-5 sliding bearing gear lever. fits 9-5 98-10 9-3 98-02 900 94-98 9000 85-98 900 79-93
saab 9-3 (2002–2007) pre facelift dynamic light indicator insert LED light bar is: heigh 3,5mm widht 14 mm lenght around 30 mm
I've made speaker adapters for Saab 9-3 NG to use aftermarket 6.5" speakers. Specifically Saab 9-3 SS 2008 Vector with Premium 150. The file is for left front door and can be mirrored into right door version. I printed in PETG With 5…
Double din radio mount designed for the Saab 9-3 07+ You have to modify it to fit your radio, but it fits in the dash. The dash curves a bit, which this mount doesn't. Other than the curve, it fits like a glove! This mount is still work…
Coolant cap designed for the Saab 9-3 2003+. It is designed to go on top of the original cap. It fits excellent, and snaps around the original cap. It's easy to modify it in Tinkercad, to get the logo you want. I printed the cap in PETG,…
This is a replacement for the Saab convertible roof clutch wheel used in the hydraulic roof drive assembly. It replaces OEM part numbers 5361001 and 12833536 . I recreated this part after my original clutch cracked. It was designed in…
These are spacer mounting tabs for mounting Pinoeer TS-G1345R 5 1/4 inch speakers into the factory speaker cup mounts. I have a 2002 Saab 9-3. This may also work for the same generation 1999 to 2002 9-5. The screws used are the ones that…
Got a new phone (Axon 7 Mini) but have the same Saab with the gaping hole in the center console from where the cup holder used to go. The old LG G4 holder deformed in the heat, so hopefully the thicker holder in this version will hold up…
So this is pretty freaking specific, seeing as it's made for my phone and my car, which has a broken cupholder, which is what I use to hold the phone holder. Figure there's a very slim chance that someone else might have this exact same…
A must for every fan of classic Swedish fighter jets: A SAAB JA37 Viggen cookie cutter! It works well for traditional Swedish Christmas gingerbread, but should work with other doughs as well. The gcode prints a rather large cookie cutter.…
Saab 9-3 water pump holding tool, holding the gear in place when you replace the water pump. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Supports: Yes Resolution: 0.2 Infill: 10-100 Filament: clas ohlson pla…
Just a simple APC Box for relocating it somewhere (Under the fusebox). Print with supports. Category: Automotive
This is a replacement part for Saab 900. This will require removal of the moonroof to swap the parts, so make sure to check the weather before doing this. I recommend printing in PETG or Nylon at a high infill. High temp filament is…
This is a replacement part for Saab 900s. This part is located at the bottom of the door card and helps secure it to the metal door. Outer diameter is 20.5mm with the inner diameter of 8.5 chamfered down to 5mm. The washer itself is 3mm…
This is just a backet to mount a turbo badge onto your Saab 900 grille in the OEM location. I do not support adding turbo badges to a non turbo car, however not all grilles came with the mounting holes. The two pins on your badge should…
Saab J29F Tunnan. I have remeshed and inflated the original model by ThibautF(https://www.thingiverse.com/thing:4549480) to make it easier to print at smaller sizes. Print Settings Printer: XYZ Da Vinci jr 1.0 Pro Rafts: No Supports: Yes…
Source: http://logic-wizard.art.coocan.jp/fms_e.htm EDF Canard: https://forum.flitetest.com/index.php?resources/ft-viggen.148/ ( https://forum.flitetest.com/index.php?threads/sp0nz-plans-index.17136/ )…
Elegant Lightweight Fighter Concept from Sweden. https://www.youtube.com/watch?v=JNB1klmzdcQ https://en.wikipedia.org/wiki/Saab_JAS_39_Gripen Source: http://logic-wizard.art.coocan.jp/fms_e.htm Modified/Remixed Design from:…
An iconic piece of art ... Saab Draken from: http://logic-wizard.art.coocan.jp/fms_e.htm (The "silver" one is from the Sketchup Warehouse) https://en.wikipedia.org/wiki/Saab_35_Draken https://jetworks.online/product/j-35-draken-plans/…
Gear stick adaptor for the Saab 9-3, coverted from the lift colar to select reverse to lift the whole stick mechanisum and add an aftermarket gearknob. The design will beed tweaking to fit a different gear knob as the diameter / size of…
---"Download all files" is broken, but it is possible to download each file individually under "Thing Files".--- Cookie cutters shaped as various Saab models ranging from the Ursaab to the last generation Saab 9-3. Print Settings Printer…
I recently bought a 1965 Saab 95 and now I needed a fitting keychain. The keychain in the picture is printed using Fiberlogy Filaflex 30D. But this is not necessary. Regular Abs or PLA will do. Print Settings Printer Brand: Creality…
I did a remix to be able to either replace the logo with whatever or print it with extruder 2 using another color. It worked out nicely. Also it is possible to print the cap itself with the flat top now facing the print bed. That way, it…
I made this in three pieces to avoid support, but it still needs support on the overhang, but this is printing with ABS. It may be different when using other materials. The parts snaps nicely together and doesn't need any adhesive to stay…
I made this in two pieces to avoid support, but I still need support on the overhang, but this is printing with ABS. It may be different when using other materials. The two parts snaps perfectly together and doesn't need any adhesive to…
Saab 37 Viggen This Swedish single-seat, single-engine, short-medium range combat aircraft was the strike-fighter and fighter-interceptor of the Swedish Air force before it's retirement. It boasts an incredible design as many variants of…
I designed this to hold a Sab Draken 1:48 scale model in an in-flight pose. Designed with an angled slot for a 3mm rod to connect to the scale model. In 1 piece or split in two, for printing with something like an Ender 3 No support or…
This download has my custom vent design as well as a 3 piece blank that you can use to make your own. When printing the vent cover, I recommend using tree supports. When printing the Mid and End pieces, I recommend normal support blocks…
this is a replacement for the lever in the climate control unit of the SAAB 9-5 OG
Saab 900NG / 93OG shortshifter + custom gear knob adapter Replacement for Saab 4027868 If you don't have a 3d printer you can buy the piece here. The problem with original part it's need to be blocked by the original knob, if you put…
I made this big SAAB-badge for a friend of mine who is a SAAB-fanatic. The original design is lent from a sticker . I converted the downloaded jpg into a svg-file * which gave a pretty useful and high quality result this time. The SVG can…
Hold the wiper blade in the wiper arm on the small headlight wiper of a Saab 900. Category: Automotive
This is exactly the same drawing as the source ! I just added the logo as an external .stl-file so that it can easily be printed in an other color, on dual extruder printers.
Made mine in PETG 0.4 nozzle and 0.2 layer hight 6 walls and 25% cubic infill.
Saab 96 V4 cookie cutter, please enable print thin walls in slicer
Saab wheel cookie cutters Saab soccer ball wheel and Saab INCA wheel Please also chek out Saab 96 V4 cookie cutter https://www.printables.com/model/331040-saab-96-v4-cookie-cutter
Hello. This model will able you to use your broken warning light switch ( Saab 4109526 ), your switch it's ok ? fine, print this hehehe, nobody know when the switch will broken and pushed trought the dash. Saab 4109526 for: - Saab 9000 -…
![Coffee Scoop - Saab branded [Dual color]](https://media.printables.com/media/prints/277362/images/2460783_893430c4-17c0-4efd-8ca9-247f3a5c82a1/3ecb52c924f16adf4bd87501e7bb3ae3_display_large_277362.jpg)
