Saab 900 Turbo Badge Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a backet to mount a turbo badge onto your Saab 900 grille in the OEM location. I do not support adding…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is just a backet to mount a turbo badge onto your Saab 900 grille in the OEM location. I do not support adding turbo badges to a non turbo car, however not all grilles came with the mounting holes.
The two pins on your badge should line up with the holes in the bracket where you can secure them using glue (I chose a waterproof silicone) or by simply bending the pins arround the bracket.
Supports shouldn't be necessary as long as your printer is tuned properly.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Doesn't Matter
Resolution:
200
Infill:
38
Filament: PolyMaker PETG
Category: Automotive