FPV Drone Carry Box (Meteor 75 pro) with 12 battery slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the ultimate box to carry your tinywhoop and the batteries...and even some spart parts.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 762
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Carry Box for Meteor 75 pro (no support)
I needed a simple box that could carry my drone and the 12 batteries I have.
I couldn't find anything small enough to fit in my bag and also strong enough that it wouldn't break.
- Case fit a drone the size of a Meteor75 pro
- Battery slots are for betafpv 550 Lava 1s
- The slot in the middle is ideal for your tools, I hold them in a small plastic bag so they don't move during travel
How you can use the case:
- Hold your drone and batteries
- Take off pad for your drone (I use it when the ground is wet or when I am on the grass
How to print:
- PLA 12% infill is way enough
- I use a 0.4 mm Nozzle
- No support needed (print vertically with the flat side on the plate)
For perfect fit:
- the lid will be tight to slid in…just sand the corners a little bit and it will work nicely
Update 21/09/2025: I have re-uploaded the lid (v2.1) as the previous version of the back wall was not joined perfectly. The print worked but better do it right!
Update 08/11/2025: Added Meteor75 vertical Case v2.2 Box - 5mm smaller height, the box is a bit smaller to save on filament. The drone will still fit nicely.