FPV Drone Carry Box (Meteor 75 pro) with 12 battery slots
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the ultimate box to carry your tinywhoop and the batteries...and even some spart parts.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 129
- Makes
- 0
- Views
- 756
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Carry Box for Meteor 75 pro (no support)
I needed a simple box that could carry my drone and the 12 batteries I have.
I couldn't find anything small enough to fit in my bag and also strong enough that it wouldn't break.
- Case fit a drone the size of a Meteor75 pro
- Battery slots are for betafpv 550 Lava 1s
- The slot in the middle is ideal for your tools, I hold them in a small plastic bag so they don't move during travel
How you can use the case:
- Hold your drone and batteries
- Take off pad for your drone (I use it when the ground is wet or when I am on the grass
How to print:
- PLA 12% infill is way enough
- I use a 0.4 mm Nozzle
- No support needed (print vertically with the flat side on the plate)
For perfect fit:
- the lid will be tight to slid in…just sand the corners a little bit and it will work nicely
Update 21/09/2025: I have re-uploaded the lid (v2.1) as the previous version of the back wall was not joined perfectly. The print worked but better do it right!
Update 08/11/2025: Added Meteor75 vertical Case v2.2 Box - 5mm smaller height, the box is a bit smaller to save on filament. The drone will still fit nicely.