Ridgid Shop Vac Water Pump Hose Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter is used to replace the vacuum side of the Ridgid water pump with a hose. Connect the adapter to the pump…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 882
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This adapter is used to replace the vacuum side of the Ridgid water pump with a hose. Connect the adapter to the pump and a hose to the adapter.
The hose and pump should be primed with water, otherwise it can't pull the water from the source. I recommend a smaller 6 foot hose for the water source side rather than a very long hose for this reason.
Once primed and pumping, the pump can pull a couple gallons per minute using this adapter. It won't be as powerful as when it's connected to the vacuum, but it will work to pump water from a source.
To see it working, check out this video: https://www.youtube.com/watch?v=PvHIXFNyCO8
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
Doesn't Matter
Supports:
No
Resolution:
200
Infill:
38
Filament:
Any PLA/PETG/ABS
Notes:
Print upright with the large end at the bottom. No supports needed.
Use brim and up to 3 raft layers to improve bed adhesion.Category: Parts