1 / 2
Ridgid Shop Vac Water Pump Hose Adapter — image 1
1 / 2

Ridgid Shop Vac Water Pump Hose Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This adapter is used to replace the vacuum side of the Ridgid water pump with a hose. Connect the adapter to the pump…

Rating
5 / 5
Likes
12
Downloads
57
Makes
1
Views
882
Reviews
1

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

This adapter is used to replace the vacuum side of the Ridgid water pump with a hose. Connect the adapter to the pump and a hose to the adapter.

The hose and pump should be primed with water, otherwise it can't pull the water from the source. I recommend a smaller 6 foot hose for the water source side rather than a very long hose for this reason.

Once primed and pumping, the pump can pull a couple gallons per minute using this adapter. It won't be as powerful as when it's connected to the vacuum, but it will work to pump water from a source.

To see it working, check out this video: https://www.youtube.com/watch?v=PvHIXFNyCO8

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

Doesn't Matter

Supports:

No

Resolution:

200

Infill:

38

Filament: Any PLA/PETG/ABS

Notes:

Print upright with the large end at the bottom. No supports needed.

Use brim and up to 3 raft layers to improve bed adhesion.

Category: Parts

Tags