SKÅDIS mount for Fnirsi DPS-150
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount this mini programmable power supply to a SKADIS board using the T-Clip system.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 135
- Wydruki
- 2
- Wyświetlenia
- 456
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This model allows you to mount a Fnirsi DPS-150 to your IKEA SKÅDIS board, using the T-Clip System by @LineArcLine.
To create this, I also made use of the Skadis T-Clip negative hole by @capze_178225.
You will need to print two of the appropriate T-Clip model from Line Arc Line for your board for this model to be mounted.
The power supply will be at a slight angle, allowing you to still see somewhat see what is on the buttons.
It is still possible to tilt the screen to your preferred angle.
I use mine with an angled USB-C cable in the back for powering it via USB Power Delivery.
I suggest printing it on the surface that will be mounted to the Skadis board (e.g. the part where the slots are for the T-Clips). I printed mine with tree supports for the sides that “stick out” next to the mounting bracket.