Bruno Sandwich Maker Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sandwich maker clip to hold the grill closed and keep pressure on the contents
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Seems this is a common problem with an older model Bruno sandwich makers and I created this clip to help a friend out. I added to the design of the clip to include an additional clipping position if the sandwich is too fat.
I used ASA because it was a higher temperature plastic I had on hand. PLA might not work, it could become deformed from the unit giving off a lot of heat. (This is just speculation on my part; PLA could be sufficient but I've used PLA in other applications that deformed over time.)
Also I recommend printing this part vertically this makes the clip much stronger.
When I ran some test prints laying down on the print bed the clip broke easily along the layer lines. (if that makes sense) See the 3mf file.