Bruno Sandwich Maker Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sandwich maker clip to hold the grill closed and keep pressure on the contents
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Seems this is a common problem with an older model Bruno sandwich makers and I created this clip to help a friend out. I added to the design of the clip to include an additional clipping position if the sandwich is too fat.
I used ASA because it was a higher temperature plastic I had on hand. PLA might not work, it could become deformed from the unit giving off a lot of heat. (This is just speculation on my part; PLA could be sufficient but I've used PLA in other applications that deformed over time.)
Also I recommend printing this part vertically this makes the clip much stronger.
When I ran some test prints laying down on the print bed the clip broke easily along the layer lines. (if that makes sense) See the 3mf file.