Wandregal für 10 PlayStation 2 Spiele
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dieses Wandregal wurde speziell für PlayStation 2 Spiele im Originalcase entwickelt.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Dieses Wandregal wurde speziell für PlayStation 2 Spiele im Originalcase entwickelt.
Es bietet Platz für 10 Spiele und sorgt dafür, dass deine Sammlung ordentlich und griffbereit an der Wand präsentiert wird.
👉 Aktuell ist eine Standard-Version mit 2 Befestigungslöchern enthalten.
Zusätzlich werde ich noch Varianten mit 3 und 4 Löchern nachreichen, falls du mehr Stabilität für deine Wandmontage benötigst.
Der Fit ist bewusst eng gestaltet, sodass ein minimaler Druck notwendig ist, um die Spiele hinein- oder herauszunehmen. Dadurch sitzen die Cases sicher im Regal. Ich habe die Seiten bereits leicht angepasst, damit es insgesamt etwas leichter geht, der feste Halt bleibt jedoch bestehen.
Bitte achte unbedingt darauf, beim Befestigen die richtigen Dübel und Schrauben für deine Wandart zu verwenden.
- Schrauben sollten nicht zu kurz sein, damit das Regal bei voller Beladung sicher hält.
- Für jede Wandart (Beton, Rigips, Holz, etc.) muss der passende Dübel gewählt werden.
Druckhinweise:
- Layerhöhe: 0,2 mm
- Infill: 20 %
- Wandmontage empfohlen
This wall shelf was designed specifically for PlayStation 2 games in their original cases.
It holds 10 games and keeps your collection neatly organized and within reach.
👉 The current file includes a standard version with 2 mounting holes.
I will also add versions with 3 and 4 holes later on for users who want extra stability.
The fit is intentionally tight, so a little pressure is required to insert or remove the games. This way, the cases stay securely in place. I’ve slightly adjusted the sides to make insertion smoother, but the shelf will still keep the games firmly held.
Please make sure to use the correct wall plugs and screws for your type of wall.
- Screws should not be too short, otherwise the shelf may not hold well when fully loaded.
- Always choose the right plugs for your wall material (concrete, drywall, wood, etc.).
Printing Tips:
- Layer height: 0.2 mm
- Infill: 20 %
- Wall mounting recommended