Liczymy pasujące modele…
For all the nostalgic people (like me), I created a copy of the Metal Gear Solid 3 Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print…
I added the holes from the PS2 caddy cross mix (by Earth4sX) to the short Gamestar version of the tray (by RetroGameRev
Mount your Ubiquity PS210 power supply on the wall. Three screw holes. Slides in no need to unmount to remove.
you can really hold anything. please download. it is a race between makerworld and printables who can get a printer faster.
As I've modded more guitars I realized my previous adapter for World Tour guitars didn't fit PS2 ones. So I made another specifically meant for PS2 guitars as I mod a lot of those now. Basically when I run a cable/dongle in my modded…
I picked up a pink PS2 Slim a while ago, which for some reason had the Bezel on top ripped off. This seemed like a nice opportunity/reason to remake that part, it's a simple enough model that made a nice quick practice for me. I have…
If you want to mod a launch model SCPH-3000x PS2 e. g. with a silent fan, you need an adapter to mount the fan. Unfortunately there is no other solution for the oldest PS2 systems, because the piece, where the fan sits in place, can't be…
I liked the caddy that is available from Stone Age Gamer but i didn't want to pay for something I could print myself. I also wanted something simpler so i remixed Portion's and RetroGameRevivals' models together
Inspired by other, extremely overpriced brackets for connecting 2.5" SATA drives to early model PS2s available on retro gaming websites that wound up being 3D printed already, I designed this alternative that both uses less filament and…
A simple design similar to the original. Print in TPU for the best grip.
This is a remix of the original 3.5” HDD caddy designed for the PlayStation 2. It was was created to address specific needs for taller HDDs and enhanced usability. Like the original, this caddy supports both IDE and SATA (converted)…
You will need: 2x 12mm M2 screws 2x M2 nuts Male PS2 gamepad Connector ESP 32 Mini
Shield to prevent bent ribbon cables from scratching discs (common fault on Playstation 2 slims). Only compatible with laser model SPU-3170. Needs to be glued to the laser assembly (the console needs to be opened in order to do so…
Ive redesigned this tray from scratch since many of the cheap solutions are unreliable and possibly incompatible, I was looking for a way to use the StarTech IDE2Sata adapter with the original PlayStation2 network adapter. With this mount…
N'hésitez pas à me dire ce que vous en pensez et surtout à lâchez un p'tit commentaire ça fait plaisir et ça me donne de la force ! :) je vous ait mis mes paramètre en photo pour que ça soit plus clair pour tous le monde. Si vous voulez…
Hi Internet Sim Racers, If you've printed a 70mm Hub adapter from any other modeler, and you've decided you want to extend or put in an insert for your 6 Pin DIN connector in the hub to make it connect to the wheel like the original.. You…
Simple bracket/caddy for a 3.5" IDE HDD to fit inside the original PS2 with a Network adapter. Other bracket/caddies seem to be designed for SATA drives which don't fit IDE as the drive needs to be recessed slightly (about 3mm), at least…
They aren't perfect and can use some adjustments. The clip ones are quite weak,
For all the nostalgic people (like me), I created a copy of the GTA San Andreas Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will…
I made these to add a bold look to my old Epiphone LPS2 (named Vör) and designed a new pickguard to accomodate the addition of a 3rd humbucker. The selector ring should be printed with a different color for the first layers to get the…
For all the nostalgic people (like me), I created a copy of the Max Payne Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will not…
For all the nostalgic people (like me), I created a copy of the GTA Vice City Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will…
For all the nostalgic people (like me), I created a copy of the GranTurismo 4 Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will…
For all the nostalgic people (like me), I created a copy of the NFS Underground 2 Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print…
Custom enclosure for the OmniPreSense OPS243 speed radar PCB. Extra spacing on the side for the units that include the WIFI module. Recommend printing lid extra thin with as few layers and infill as possible to achieve the best…
I like the PS2 version and also have a MacBook Air M2, so I remixed it to be used with a MagSafe 3 charging cable. The model is snug fit, so you may need to push a bit harder.
For all the nostalgic people (like me), I created a copy of the Crazy Taxi Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will not…
It print best for me if I select the rear 45 degree plane for the base layer.
Made a hold down bracket for A6x15 Noctura fan mod. "Should" work with other 60x60x15 fans. Used .2mm resolution, regular PLA at 10% infill. Print on side and use supports.
A simple mod for the Slimline PlayStation 2 that protects your discs from getting scratched by the lasers ribbon cable. Support for both laser types! The mod should work on any PS2 Slim model in theory but confirmed to work on 70004 &…
Super small and simple mount to hold a Noctua A6-15 Fan in the stock location on a PS2 fat. I have only tried this in a 30k model but I Imagine it would work in others.
This model is a case I recently designed to house an adapter that allows PlayStation 2 controllers to be used as standard XInput devices on any PC, without extra software! The adapter supports hot plugging and offers simple display output…
Hello, I have a TV controller stand for Playstation 2, PS2 for you. This is a special controller stand for PS2. It should be absolutely accurate and has a socket for the console connector - it is compatible with the PS2 controller. I used…
Vertical Stand for PlayStation 2 (3D-Printed) Material: PLA Color: Customizable Compatibility: Play
For all the nostalgic people (like me), I created a copy of the NFS Most Wanted Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will…
For all the nostalgic people (like me), I created a copy of the NFS Carbon Playstation 2 disk with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will not…
Nothing special. Printed in PLA. No supports needed if your printer can do 45 degree angles. No fancy latches or anything, I intend to super glue the halves together.
I scoured all the major model sites for bit holder for my beloved Bosch PS21 Driver. I printed out a bunch, but many were not the same drill model, or required magnets to be glued during the printer or after. The original model that this…
Perfect fit for the original PS2 remote (Sony DVD/PlayStation model) Slightly tilted front, ensuring better viewing and access to the controller Clean and stable design, ideal for display or organization 🖨 Printing Recommendations:…
Diseño Este modelo está inspirado en un controlador clásico de PS2 y diseñado como un llavero compacto. Su diseño detallado mantiene las características originales de los botones y joysticks emblemáticos. Uso Perfecto para los entusiastas…
For all the nostalgic people (like me), I created a copy of the Metal Gear Solid 3 Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print…
Rack ears for a Goalake PS208G POE switch to fit in a 10inch mini rack Printed in PETG, 4 walls, 35% gyroid, ABS would probably also work, but PLA may be too temperature sensitive for this. M3 BHCS approx 6-8mm long should be good for…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- This model portrays a Cyclops in the Crystal Facets…
You may need to sand down the bit when it's done printing, as when these things break off, they won't break cleanly.You may need to sand down the bit when it's done printing, as when these things break off, they won't break cleanly, and…
🇪🇸 Español 🎮 Para el cumpleaños número 18 de mi hijo elegimos una temática gamer. Como parte de la decoración diseñé una colección de porta servilletas con forma de controles retro. En esta ocasión el modelo está inspirado en el control…
Based on Retrofrog's vertical stands for both the PS2 slim and Retrotink 4K. Combining them to save some space. Trimmed some of the excess flourishes to simplify the design. It doesn't look as nice as the originals by Retrofrog, but works…
Un porte-clé inspiré du logo PlayStation 2 , modélisé pour une impression nette même à petite taille. Idéal pour vos clés, sacs, ou comme petit cadeau geek. ➡ La version grand format est disponible sur mon Patreon Retro3D.…
Case for two joysticks from Chinese shopping platforms. Joysticks are typically used with development boards such as Arduino, micro:bit, ESP32, Raspberry Pi.
Vertical stand for the PS2 Slim 2 (SCPH-9000X). It's also compatible with the Slim 1 but wouldn't it be better to use the correct one for authenticity? The shape resembles the official design. However this is a vase design in order to cut…
I bought a PS2 Hyakushiki SCPH-55000 GU but it didn't come with the bundled special stand. So here's my recreation of the stand. Print Print the two decorative plates in horizontal position for best quality. * Recommended layer height:…
Created a while ago. Vertical stand for SCPH-7XK Attaches to PS2 Slim with one M3x12mm screw. Nothing complicated. Version for SCPH-90K model here Screws I usually use: https://www.amazon.com/gp/product/B014OO5KQG Print Settings Printer…
I added the holes from the PS2 caddy cross mix (by Earth4sX) to the short Gamestar version of the tray (by RetroGameRev
Mount your Ubiquity PS210 power supply on the wall. Three screw holes. Slides in no need to unmount to remove.
I printed it in ABS for better durability, with supports
To make this adapter you'll need: x4 M3 nuts x4 M3x14mm screws x1 Controller cable for PS1/PS2 (I used one from a generic controller) x1 Esp32 of the following form factor (see picture below) I recommend testing it after flashing it…
Hello, Today I have a Playstation PS1, PS2 controller holder for you The controller fits beautifully into the stand. They will beautify any video game collection. It is for a special type of controller for PS1, PS2 Classic controllers…
This is a case for the ps2x2pico project, it is entirely snap fit and doesn't need any fasteners. You can print ps2x2pico_case.stl as is, but OpenSCAD files are included so that you can change hole diameters and tolerances in the…
Printing Defaults settings with no supports worked for me, using PETG. I set the bed plate in the fridge after printing to ensure the part cools completely before removing, else it can break. Should snap into place as a battery cover…
you can really hold anything. please download. it is a race between makerworld and printables who can get a printer faster.
fairly basic memory card holder developed in tinkercad, prints well, needs to have the logos glued in. can have the Ps1 logo print in multicolor (see attached picture). please comment with questions or concerns.
Replacement 3D printable part for the PS2s controller d-pad bracket pivot. Tested with Bambu A1 using eSUN PLA with beading. Made with FreeCAD. Surely can be improved, first CAD project I ever do.
This wall mount is specifically designed for the Bosch 10.8V PS20 Driver and dual battery kit. The screw holes are for #6 flat head wood screws.
Simple in-slicer-created remix which fits ps3 gamepad with charging cable Fits ps1 and ps2 gamepads (last photo)
A vertical stand for the Playstation 2 slim edition OnShape Model https://cad.onshape.com/documents/f3a53f2d6a42986528219461/w/3923617954cba25f6aee205b/e/0b90fd49f6e74bb7e3f60d3b
Designed to be placed under the "Fat" model PlayStation 2's under the aluminum heat sinks to support the PCB during disassembly.
This adapter suits the PlayStation 2 Expansion Bay with ethernet that has the sliding/moving metal brackets for IDE/Molex. This allows easy and secure installation of the widely available SATA adapter kit available for this. The screws in…
As I've modded more guitars I realized my previous adapter for World Tour guitars didn't fit PS2 ones. So I made another specifically meant for PS2 guitars as I mod a lot of those now. Basically when I run a cable/dongle in my modded…
Adapted for the PS2 50004 model
3D printable PlayStation 2 logo. This design can be scaled to any size in your slicer. Printed flat with low infill (approx. 5%) to save material and time. Use it as a wall sign, desk decoration, or a personalized gift. Category: Signs &…
Video Game Stands (PS1,PS2,PS3,PS4,PS5,PSP,XBC,XBO) by nibor_repmek - Thingiverse
Stand for the original “Fat Body” PS2. They sold an accessory like this back in the heyday of the PS2 but it was unnecessary and I don’t think it sold very well. There’s still a few on Amazon and eBay but for exorbitant prices. I didn’t…
A PlayStation 2 slim vertical stand with a screw hole, no supports needed
ATTENTION EBAY/ETSY/ETC SELLERS. IF YOU ARE GOING TO SELL THIS MODEL FOR THOSE WHO CANNOT PRINT ONE THEMSELVES, GIVE PROPER ATRRIBUTION. IF YOU CONTINUE TO TRY AND PASS THIS OFF AS YOUR OWN I WILL PURSUE TAKEDOWNS . This is my take on a…
PS2 Ultra Slim is a PS2 79xx modification created by Wesk to make the PS2 slim even smaller. Rapha on the Bitbuilt forums adjusted the shell for USB-C and original power adapter use and made the Playstation 2 mini rotatable logo that…
OpenUPS2 Case (parametric) A two-part snap-fit enclosure for the OpenUPS2 board (PCB 115.2 x 69.85 mm). The lid clips onto the base with printed snap latches and is secured by 4x M3 screws that go into the board's own threaded standoffs.…
For those who want to display their PS2 Slim. Two part wall mount that allows you to slide the console when needed. Elegoo PLA+ I printed using 4 walls Infill - 40%
This is a display stand for any media in Switch game cases, DS and 3DS game cases, DVD cases (PS2, GameCube, Xbox, Xbox 360, movies, etc.), CD jewel cases (single CD PS1, Dreamcast, Turbografx 16/PC Engine, etc.), Bluray cases (PS3, Xbox…
Fret buttons for PS2 version of Guitar Hero World Tour controller. Modeled after the original fret with slight modifications. Made for low profile Kailh switches with 1mm indentation for the switches. Made for PS2 World Tour guitar…
Una visualización tridimensional del icónico logotipo de la PlayStation 2. Esta recreación en 3D busca representar fielmente el diseño original del logo de la PS2, pero con una mayor profundidad y volumen que la versión plana. El objetivo…
This is a quick rework of ilvise's Sony PS2 FAT hdd adapter mount to fit thicker (15mm) hdds. Original design = https://www.thingiverse.com/thing:4749540 Category: Video Games
I made this stand for the PS2HDMI adapter so it doesn't hang and put stress on the AV port of the PS2. This stand should work on both the Slim and Fat models. This has a really tight fit, but after putting it and taking it off one time,…
Soporte para poder poner la ps2 en vertical, ademas cuenta con un hueco para poder guardar una Memory Card
I tried using RetroGameRevival's file PS2_2.5inch_HDD_Caddy_GameStar_Full for my PS2 system (SCPH-39001) and it was 2mm too wide on the right and the HDD needed shifted left 1mm in order for everything to line up. Rather than trying to…
This is a lid for the planter buckets on an Ikea PS2012 sidetable. The sidetable has built in planters and buckets to do in them, but didn't come in with a lid to make the top flat, so I made these lids which resemble buttons.
credits to https://www.thingiverse.com/dphirschler/designs I really liked the ‘minimalistic’ design in comparison to any other models had seen and was my first ever make once i put my hands on a 3d printer to almost complete a project…
User megavolt85 on the dreamcast forums released code/firmware for the STM32 "Blue Pill" that works with the Maple protocol that the Sega Dreamcast uses. My goal was an in-expensive PS/2 adapter so I could connect PS/2 keyboards and mice…
This is a holder for 3 or 4 Original 8MB PS2 Memory Cards (Magic Card)
Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…
Minimal vertical PS2 Slim stand originally designed by @ShadowMoses and remixed by me with these features: Memory card section removed Optional versions with or without ventilation
I created this for my Playstation 2 controllers. It is completely printable without supports and in one piece. And keeps the cables nice and tidy behind the controller itself. I believe the original playstation Duel Shock Controllers are…
