BlueRetro Ps1 / Ps2 USB C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an edit of the BlueRetro PS1/PS2 dongle made by "madmon" to allow the use of a USB C ESP32 devboard
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 176
- Wydruki
- 2
- Wyświetlenia
- 2175
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
You will need the following items for this print:
ESP32 30pin USB-C Dev board, these are common on places like aliexpress
Ps2 Controller Male Connector, you will need to bend the legs straight or find a connector with already straight legs, these can also be found on aliexpress
4x M2 bolts (M2*12 seems like the perfect length) and 4x M2 Nuts
Follow the wiring diagram for soldering made by “madmon” on thingiverse.
According to madmon you do not need to connect PIN3 to VIN.
The external sync LED is not needed as the onboard LED's on the dev board will be used, print the insert in transparent filament to let the light from the LED's shine trough.
I recommend printing the insert in PETG or other heat resistant filament as it will be directly touching the ESP32.
To flash the dev board follow darthcloud's guide on Github https://github.com/darthcloud/BlueRetro
Follow point 1. on the wiki for this build.
https://github.com/darthcloud/BlueRetro/wiki
I have printed and assembled several of these now and so far all of them have worked flawlessly.
I am a novice at 3d modeling and editing, if you have any questions feel free to leave a comment.