DIY Blueretro 5in1 [PS1, PS2, PS3, XBOX360] - guide on description
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blueretro 5in1
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 214
- Wydruki
- 0
- Wyświetlenia
- 5197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Blueretro case for minified ESP32. Will work with PS1, PS2, PS3 (via adapter), XBOX 360 (via adapter).
Recommended material: PETG/ABS/ASA. Will work with PLA but could deform since ESP32 gets kinda hot.
What is blueretro?
BlueRetro is a multiplayer Bluetooth controllers adapter for various retro game consoles. Lost or broken controllers? Reproduction too expensive? Need those rare and obscure accessories? Just use the Bluetooth devices you already got!
HOW TO:
Required materials for PS1, PS2:
ESP-VROOM-32
Male PS2 Connector
4 M2x10 screws.
4 M2 nuts.
Cables.
10k resistance.
AMS1117 3.3.
Extra for PS3 and XBOX 360:
PS2 to PS3 controller adapter.
PS2 to Xbox360 controller adapter.
1. How to flash an ESP32 with Blueretro:
- Connect your ESP32 to your computer.
- Enter this website: ESP32 ONLINE FLASH TOOL (thanks to Mundo Yakara)
- Click at CONNECT button under “BLUERETRO” para PSX, PS1, PS2.

- Choose your ESP32 on the popup.
- Click at INSTALL PSX, PS1, PS2 on the new popup:

- Press your BOOT button at your ESP32 and click INSTALL.

- Wait until install is done
Congrats! You have Blueretro on your ESP32 chip :)
2. Let's test Blueretro (optional)

This is the diagram used with the full chip, this is totally optional, but it's recommended to test if your controller pairs. Blueretro will be on pairmode by default if no controller is connected, put your controller on pair mod and test if it works. I recommend to use dupont connections directly to the PS2 connector/adapter like this:
3. Minifying ESP32:
Here is where you need 10k resistor and AMS1117 3.3, Follow this diagram:
Congrats your ESP32 is now minified!
4. Prepare bottom part and connector:
Connector pins will have bent pins, so we have to straigth them up and glue the connector into the bottom part.
CAUTION: Connector orientation is important and it will be easy to identify since top part is straight and bottom side follows the curvature of the connector
This will be the result:
Now glue the male PS2 connector to the bottom part.
5. Let's translate the pinout to minified version
Follow this diagram now: 
And enclose it!
CONGRATS! Your Blueretro is finished!
