Liczymy pasujące modele…
This is my mini lab bench power supply with a DPS3003 (or compatible DPSs) as main component. It features two modes: powered by battery or powered by an external DC source. This way it is very flexible to use. You'll need: 3 position…
For a full description and build instructions, please see the original model Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source . This remix is intended for stand-alone battery operation without the option for…
Screencase https://www.thingiverse.com/thing:2776109 or https://www.thingiverse.com/thing:1229473 Category: 3D Printing
Clip for screwing in the top cover for backwards compatible PS3's. M3 nut is all you need to use it. If you're missing the original torx screw, then a M3 x 6mm screw can be used instead.
Five33 Flip Switch Freestyle Frame GoPro 11 mini mount 20 Degrees PS3 holes
Universal GoPro mount for Five33 Frerstyle frame with PS3 spacers
Five33 Freestyle Frame GoPro 11 mini mount 30 Degrees PS3 holes
Base for the Five33 Freestyle Frame with holes for PS3 spacers.
Did you take your PS3 controller apart and proceed to watch the guts spill out with so much force and hatred that you questioned why you ever decided to even open the controller in the first place? Then you spend the next 30 minutes…
This is a remix a of Z-Axis mount by EBD Design Studio (used cable clamp) and original design by Darmichar with added holder for PS3 EyeToy. 0.2mm layer height 10% infill Supports on Brim optional Print on the longest face with the…
Organize your game collection in style! These practical and stylish game holders are designed to keep your PS3, PS4, PS5, and Switch games neatly organized and within reach. Features: Space-saving design: Maximize storage space and…
The Mettler-Toledo postage scales have four "arms" that the weighing platform sits on. Each arm has a plastic/rubber bumper piece, which sometimes can break off or be missing. Instead of finding a replacement, just print one! To use,…
Someone gave me a PS360 DC voltage converter & control element from Joy-IT . However, this voltage converter comes without a case, the demanded fan and the power supply. So, I made a case to be able to use it more safely. What to think…
Hello, Today I have a Playstation 3 for you, a PS3 controller holder . The controller fits perfectly into the stand. They will beautify any video game collection. Good luck with the printing! I used PLA/PETG as the material. You need to…
Very simply, I love the flat mount, but only needed it for one controller. So I cropped it. 2 versions, one full depth on the back, one shorter to save plastic/time. Be careful of direct WALL mounting the shorter one, it might not clear…
Hello, Today I have a Playstation 3 slim vertical stand for you. The PS3 holds up beautifully and is not in danger of falling. The console is well balanced and the stand does not interfere with its process. The stand also helps with…
The Onshape files can be found here: https://cad.onshape.com/documents/df0b3f0a4026fec2714bccaa/w/c6e1445203c64036d594bf2b/e/e127d6d1c369c972726e20af?renderMode=0&uiState=6988c5b4e200f073ca41870f Feel free to use or modify as you see fit.…
I made a Multiboard attachment version of the PS3 under-desk controller holder so it can mount cleanly onto a Multiboard setup. The goal was to keep the original design intact while making it easier to integrate with modular desk storage…
A silly mod to add a shark fin to the top of the CPS3 underwater drone (www.cpsdrone.com). Uses the existing screws that hold the buoyancy foam in place.
This is a ESP32 Board holder that supplies power and protection to your ESP board designed with WLED in mind it gives you 2 places for switch and enough terminals to power multiple led strips or matrix and a neat box Link to video: ( I…
PS3 Game holder for up to 10 games. Print upright with the text on the the print plate. It is a 30 degree overhang so you don’t need supports If you use the stl, simply color the logo in the desired color with the paint bucket no supports…
how to build All sensors are from Sensirion. They all use I²C bus. The two little ones can withstand 3.3V and 5V, the PM sensor needs 5V. I choose to operate the little ones at 3.3V to minimize their heating. The SCL and SDA wires can be…
A1 and up PS3 controller batteries have built in standoffs but the knockoffs you can buy currently seem to have unreliable random size cells inside. I chose to get some 453048 Lipo's instead so I had a better chance at a reliable cell and…
Original HDD Tray for the PS3 console Applicable console models: FAT CECHA/B/C/E/G The design is printed in 2 pieces which can be glued together after printing to simplify the print process. I have attached 2 files, part 1 contains the…
Over engineered wall mount. I could probably do something smaller or thinner, but since this worked nicely I decided to keep it. You will need a large format printer. I printed this as one piece on my CR10. Print Settings Rafts: No…
I use ESPHome and an external component to control all my split units. I wanted the devices to be outside of the housing in case I needed to reset them or otherwise modify them. I wanted to also be able to see the status LED to tell me if…
Main DPS unit: DPS3005, DPS5005 Female banana connectors: standard ones should fit OK Speaker spring connectors: standard double pole version 5521 DC jack: again, standard ones that look like this (approx. 9mm x 11mm x 14mm)
A set of parts that provide a flat top or “feet” for the rounded PS3 slim surface, to place items on top of it. I needed to place my xbox 360 on top of the ps3 due to its fan outlet being placed on the top; If I put the ps3 on top of the…
I remade the original by @HenrikBossum_326737 as a parametric fusion model to fit on more different plate thicknesses. I also added a hole to the thick plate into which I put an M5 heated insert and an M5 grub screw to be able to clamp…
Hori RAP3 fightstick for the PS3 to replace control board for GP2040/Brook fighting board adapter. the old board pin location taps on the fight stick will need to be trimmed off.
This is a remix a of Z-Axis mount by EBD Design Studio (used cable clamp) and original design by Darmichar with added holder for PS3 EyeToy. 0.2mm layer height 10% infill Supports on Brim optional Print on the longest face with the…
Lens cap for Sony PS3 camera As protection for the lens, but mainly to decide for myself when the camera delivers a picture, because I like to use only the microphone of the camera. Printed with Ninja Flex.
Remixed the housing from JT https://www.thingiverse.com/thing:2820147 in order to support: ESP32 Feather Huzzah with 2.4" TFT Wing Bosch BME280 sensor Sensirion SPS30 sensor Source code can be found here:…
Remix of @PrimeRetroGamer Stand that supports two controllers instead of just one.
Remeber you might need to fiddle with mirroring to get the right position for your need.
For “Top Down” controller play….here is the Deer Sled for your “dear”, loved one using the PS3 Controller to access the L1, L2,R1 and R2 buttons from the top without blocking any analog functions. Press the “antler” Lever forward and it…
PS3 Game / Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.: 17.5cm x…
I had to mount some DPS3005 ‘Digital Power Supply’ modules (available on Aliexpress) and a reliable Mean Well HRP-200 power supply in a proper case. Most cases for modules in this format do not provide enough space to include the power…
Organize your game collection in style! These practical and stylish game holders are designed to keep your PS3, PS4, PS5, and Switch games neatly organized and within reach. Features: Space-saving design: Maximize storage space and…
Brackets for PS3 controllers to hold non Sony battery in place
PS3 Dual Shock Controller Triple Stand ! Added a 3rd stand for 3x PS3 controllers. Remix of the double stand from @gavin : https://www.printables.com/model/474383-ps3-dual-shock-controller-double-stand Check my profile to see other models…
Remixed from PS3 Eye Camera Mount for different positions by ccvh with the help of Max666 , thank you! :-) I kept it pretty simple, but it works perfectly. Please see photos, also the photo from the camera itself, taken out of OctoPrint.…
The Mettler-Toledo postage scales have four "arms" that the weighing platform sits on. Each arm has a plastic/rubber bumper piece, which sometimes can break off or be missing. Instead of finding a replacement, just print one! To use,…
This is a project to upgrade the Kingroon KPS PRO S1 printer on the klipper firmware. The main thing that makes the project is a beautiful and neat laying of printer cables without lengthening them. From the upgrades of the printer…
Gives you a Z-axis mount for your PS3 eye webcam on the Ender 3 S1 printer. Pretty snug fit so you can make the gap a little smaller but I just tapped it on with a small plastic mallet and it's pretty sturdy up there. 3rd pic is what the…
I've created a power supply that's designed to be powered by Milwaukee batteries. This setup allows for a versatile and portable power solution, utilizing the robust and readily available Milwaukee battery system. The power supply…
this is a 3d printed smoke extractor . from old ps3 turbo bowler. u can watch build video here.↙ https://www.tiktok.com/@m_make98/video/7491249646728187154?is_from_webapp=1&sender_device=pc&web_id=7282482179203859975
Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB. I used M3 injection nuts to fix the back cover and safety banana sockets to be able to use multimeter probes. On the backside is a DC power socket . The M3…
I played several fps using UEVR, they were cool but someting was always missing especially when using a rifle and not a pistol. A simple Stock would not do as there are not enough buttons on the pico controllers. So i decided decide to…
This model is a remix of the Skadis PS4 Controller Mount but adapted to fit the PS3 controller. It still uses the Ultimount connectors. https://www.printables.com/model/376207-skadis-ultimount-connectorhook
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a TV controller holder for PS3, Playstation 3. The stand is designed for the PS3 controller on the console controller. The letters can be printed separately…
So you bought an old PS3 fat console off your favorite auction site, but the clown before you didn't know how to properly disassemble this glorious console and the top cover screw tab is broke off. Well, you're in luck. Since OEM…
This is designed to either by partially 3d printed on a standard sized printer (fits on Prusa MK2,3,&4) with the use of laser cut or CNC panels, as well as a fully 3d printed larger format printer (at least 23x27cm) Parts: Hybrid laser…
I played several fps using UEVR, they were cool but something was always missing especially when using a rifle and not a pistol especially in “ALIENS Fire Team Elite”. After some time the mod i created did not just feel enough nor it give…
The Hinge is Print-in-Place, you may enable Supports and print it upright. Tip: Put some Putty on the Contact Surface on the back of your Screen and inside the Cam Stand Slot, so it does not wobble.
I found this random model online and was surprised to not see it on any model website so here it is! If you know who made it or is the creator and want credit/taking it down let me know so I can respect your wishes. The PS3 “Boomerang”…
🔑 Llaveros PS3 Retro – Homenaje a la Era Clásica del Gaming Revive la nostalgia gamer con estos llaveros inspirados en el icónico diseño de la consola PlayStation 3. Cada pieza celebra los detalles emblemáticos que marcaron una…
I remixed Forker45’s project to suit my needs — allowing me to stack over 100 games vertically with minimal filament use Note: It's recommended to let the print cool down on the bed after printing. Since it's a thin layer, it can warp…
I modified to PSU Case to fit a cheap USB-C power delivery decoy module like https://www.aliexpress.com/item/4001253821461.html with a DPS3005 and it's USB-Controll-Module (e.g. https://s.click.aliexpress.com/e/_AmyMWd ). Build is…
A Bracket to hold a Sensiron SPS30 particle sensor. The Bracket can be glued onto the SerialCarrier of the SensorBox (V2) . The Sensirion SPS30 is only snapped in. The Bracket respects the design rules from the Sensiron datasheets and…
SANPU EPS350-H1V12 Necessary hardware ( if not stated otherwise, all screws are with a cylindrical head) : 2x M3x14 countersunk screws + 2x any M3 nuts (for IEC320) 2x M3x4 + 1x M3x10 + 1x any M3 nut (for fastening the PSU to the base -…
Case for BlueSCSI V2. The board slides into the case and is held with a screw. I have been using the board as an ODE for Capcom CPSIII system but can be used as ODE in old computers as well. One screw M3x6mm is needed
Visit Jerrari3d.com for more related projects _________________________________ The RETRO GameStack system is a fully customizable and modular storage solution designed specifically for your PS5,PS4,PS3 games and Blu-ray disks. Unlike…
This is a wall mount for the PS3 DualShock controller. I have modified the controller mount, so it's fits the wall mount. Go see the original designers of the wall mount back ground and the controller mount. Back ground wall mount:…
If you have an old PS3 eye camera floating around unused and unusable on a PS4, a Raspberry Pi and a solidoodle then this is the one for you. I needed a camera since moving the printer away and this works well thanks to the awesome work…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- This model presents a Cyclops, the legendary one-eyed…
Hello, Today I have a Stand for 12 Resident Evil games for you. It is suitable for all types of Resident Evil game packaging. Playstation 1,2,3,4,5, Xbox one and Xbox 360. I haven't tried it on more games. The games fit perfectly and can…
Uses a M3 screw at least 15mm long (prefer a longer one. I used a 20mm). Glue rubber pads/felt in the indented spaces on the top and bottom.
As I started modding guitars I noticed the lack of RJ11 adapters for World Tour guitars. So I made one. I used it for a XBOX 360 one and it should fit a PS3 one as well. The chip I used as reference is almost identical. Basically I can…
Click-in DualShock 3 wall mount. See also the one for the DualShock 4: https://www.prusaprinters.org/prints/149811-ps4-controller-wall-mount
Hello, Today I have for you a PS3 camera holder for TV, Playstation 3. The holder is built for TVs up to 60mm wide. There are 2 back plates included for full compatibility with any TV. The stand also works on a table. I used PLA/PETG as…
Hello, Today I have for you a PS3 camera holder for a table, cabinet, Playstation 3. The stand works great on a table. Or in front of the TV. It is good for the camera to hold its position better and not tip over. I used PLA/PETG as the…
Tisk - Ender 3 Teplota tisku - 205°C Bed - 50°C Vrstva - 0,3mm Modul LCD DPS3012 - odstranil jsem postranní packy pro zacvaknutí a díra v předním panelu je na modul bez nich. LCD jsem lepil a to samé je u vypínače taktéž v předním panelu.…
Deutsch: Remix von: https://www.thingiverse.com/thing:2951395 Ich habe es bearbeitet für Rechteckige Kippschalter: (19,2x12,4)…
Someone gave me a PS360 DC voltage converter & control element from Joy-IT . However, this voltage converter comes without a case, the demanded fan and the power supply. So, I made a case to be able to use it more safely. What to think…
Case for the DPS3003 and USB-C PCB from China Category: Electronics
Hello, Today I have a Playstation 3 for you, a PS3 controller holder . The controller fits perfectly into the stand. They will beautify any video game collection. Good luck with the printing! I used PLA/PETG as the material. You need to…
Protect the sticks of your ps3 controller with this guard that clips on snugly. The controller's sensitive parts will be safe even when the veteran sixaxis or dualshock 3 is stored in a drawer full of cables etc.
Very simply, I love the flat mount, but only needed it for one controller. So I cropped it. 2 versions, one full depth on the back, one shorter to save plastic/time. Be careful of direct WALL mounting the shorter one, it might not clear…
Hello, Today I have a Playstation 3 slim vertical stand for you. The PS3 holds up beautifully and is not in danger of falling. The console is well balanced and the stand does not interfere with its process. The stand also helps with…
The Onshape files can be found here: https://cad.onshape.com/documents/df0b3f0a4026fec2714bccaa/w/c6e1445203c64036d594bf2b/e/e127d6d1c369c972726e20af?renderMode=0&uiState=6988c5b4e200f073ca41870f Feel free to use or modify as you see fit.…
I made a Multiboard attachment version of the PS3 under-desk controller holder so it can mount cleanly onto a Multiboard setup. The goal was to keep the original design intact while making it easier to integrate with modular desk storage…
Cover for the sides of the controller for the CPS3 underwater drone ( https://www.cpsdrone.com/ ). I wanted something to protect the exposed PCB from getting water on it easily from splashes. (Note: the Kit has been great so far,…
wall mount for ps3 If you like my design feel free to tip my design https://www.paypal.me/Djdenzo Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.24 Infill: 30% Filament: 3dgence PETG white…
Simple in-slicer-created remix which fits ps3 gamepad with charging cable Fits ps1 and ps2 gamepads (last photo)
A silly mod to add a shark fin to the top of the CPS3 underwater drone (www.cpsdrone.com). Uses the existing screws that hold the buoyancy foam in place.
