Multiboard Attachment – PS3 Under-Desk Controller Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PS3 under-desk controller holder remixed to mount on Multiboard. Credits to Saikop and the Multiboard project.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- GNU General Public License v3.0
I made a Multiboard attachment version of the PS3 under-desk controller holder so it can mount cleanly onto a Multiboard setup. The goal was to keep the original design intact while making it easier to integrate with modular desk storage systems.
Print Settings I Used
Nozzle: 0.4 mm
Layer Height: 0.2 mm
Perimeters: 3
Infill: 15% Gyroid
First Layer Speed: 20 mm/s
First Layer Infill Speed: 40 mm/s
First Layer Acceleration: 250
Supports: Tree supports (Auto)
Support Placement: Build plate only
These settings gave me a solid part with good surface quality and enough strength for regular controller use.
Credits
Huge thanks to the original creator of the controller holder design (Saikop) and to the creators of Multiboard for the mounting system this remix is designed for.
Model hosted on Printables.
If anyone prints this version and tests it with different materials or settings, I’d be interested to hear how it works for you.