Kia Stinger Parcel Shelf Rope End
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It fits in the factory rubber cover and looks OEM. Push through the rope, melt the end and flare it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
One of the strings holding up the parcel shelf in my Kia stinger had torn off. The factory ends are melted onto the rope and can't easily be replaced/re-attached.
This fits inside the factory rubber “housing” (very snug, had to use pliers to stretch it apart to put it back on).
Push the rope through, melt the end and flare it against a metal object (knife, scissors). This should prevent it from coming back off. Finally insert it into the factory rubber and viola, looks and works like OEM.
I printed mine in ABS-GF25, but I guess TPU, PETG, ABS etc. should all be fine.