1 / 3
Endoscope Mount for Petsfang Bullseye on CR-10s — zdjęcie 1
1 / 3

Endoscope Mount for Petsfang Bullseye on CR-10s

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a mount for an endoscope camera in combination with a Petsfang Bullseye on a stock Creality CR-10s. It winds…

Ocena
0 / 5
Polubienia
6
Pobrania
20
Wydruki
0
Wyświetlenia
486
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a mount for an endoscope camera in combination with a Petsfang Bullseye on a stock Creality CR-10s. It winds around the petsfang to point the endoscope directly at the nozzle.

The mount is supposed to be attached to the left of the Petsfang. If I remember correctly, you have to use longer screws than normally.

The endoscope camera is thought to be mounted with two small cable ties.

I would suggest printing it with the part with the screw holes laying on the bed.

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

20%

Filament: Geetech PLA Green

Category: 3D Printer Accessories

Tagi