Reduction adapter for 14mm hollow socket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are different 12mm and 13mm reduction adapters for a 14mm hollow socket.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are different hollow socket adapters. Originally these were designed to work on a sink faucet. These faucets are typical installed with longer pieces of all thread which requires the use of a hollow socket.
The adapters are to be used with a 14mm socket. They are designed to adapt the 14mm to 13mm or 12mm. There are two types of adapters provided. An inlay which sits inside the original 14mm socket and an adapter which extends out of the 14mm socket. The inlay are probably only tough enough for one time use.
The extending adapters are designed +0,2mm to adjust for printing tolerances. The inlay are +0mm.
Info:
The inlay on the bottom right in the image was already used and mangeld up.
Parts provided:
- Inlay 14mm to 12mm, 15mm long to snap off excess length
- Inlay 14mm to 13mm, 15mm long to snap off excess length
- Adapter 14mm to 12mm
- Adapter 14mm to 13mm
Print instructions:
- No supports needed
- Recommended layer height 0,2 mm
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.