1 / 1
Prusa XL Tighter Gap Frontcap Cover for Prusa XL enclosure 1MM Less
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's now 1mm less for the front extrusion bar.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
A simple remix to my own cap to make it 1mm more gap on each side so the door does not collide with the caps.
This seems better than my old cap when the front extrusion mod is installed.