1 / 4
Hotwheels Mclaren F1 GTR Display Base (Gulf Racing) — zdjęcie 1
1 / 4

Hotwheels Mclaren F1 GTR Display Base (Gulf Racing)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A base for Hotwheels Mclaren F1 GTR, the one I'm using is from the Gulf set.

Ocena
0 / 5
Polubienia
39
Pobrania
72
Wydruki
0
Wyświetlenia
836
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068

 

Custom display base are also available from $5! Contact me to discuss what you want!

 

If you like my work, you can support me Printables Clubs! Just click the “Support & Join”  button beside my name or here: https://www.printables.com/@GigaPenguin#join:279  

Exclusive models are included too!

 

You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts

 

Description

The display base should fit with any other Mclaren F1 GTR made by Hotwheels. If you plan to use it for the British Horsepower set Gulf Mclaren F1 GTR, I have written how to colour swap to match its livery colours too.

If you wish to have a display base tweaked to fit to a specific Mclaren F1 GTR from a different brand, please send me these dimension for the display base holes: https://imgur.com/5T6mb2L

The display base is separated into 2 parts for easy printing and colour swap. The parts are:

1) Base

  • BaseV2.STL

1) Base back wall:

  • BoxBackAssem.STL

Print Settings

Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm

Filament change layer for colours on "BaseV2":
1) Start (Main stripe outerline, mine is in orange)
2) Layer 6 (Main stripe colour, mine is in grey)
3) Layer 21 (Overall base colour, mine is in blue)

If you want it in the British Horsepower set Gulf colours:

1) Start colour in white
2) Layer 6 grey colour to orange.

Filament change layer for colours on "BoxBackAssem":
1) Start (Lower half colour, mine is in grey)
2) Layer 9 (Thin line colour, mine is in orange)
3) Layer 14 (Upper half colour, mine is in blue)
4) Layer 19 (Gulf logo background, "Mclaren F1" lettering and "GTR" inner colour, mine is in white)
5) Layer 26 (Gulf logo half circle and "GTR" outerline colour, mine is in orange)
6) Layer 31 ("Gulf" lettering and Gulf logo outerline, mine is blue)

If you want it in British Horsepower set Gulf colours:

1) Start colour in orange.
2) Layer 9 orange colour to white.

Assembly

The car is tied by wires through the hole in the base

Back plate should slide in nicely into the display base.

Others

If you want a generic variant to fit other cars, I can't seem to find a general Gulf team logo so I skipped it for now.

Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.

I can be contacted through Instagram or Twitter too:

Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/

Tagi