Liczymy pasujące modele…
Be one of ten who leave a Like at Printables and support me with it :) Prevents cable breakage at the housing outlet and rubbing on the Y-axis motor. It can be attached to the underside of the housing and to the recess for the stepper…
Wenn der Golfplatz zu weit ist. Hole dir dein Platz nach Hause und werde zum Profie.
This is the second one of these I have made. Check out the Global 7500. This STL can be scaled smaller, you just may loose some of the thin lines around the cockpit windows. try using a x-acto or some flush cutters to snip off the…
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order Start with White, Red, then Purple. Quick Guide to changing filament~ Have some paper to…
I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough to my taste. So picked 60 to match Klipper minute:second approach when using SCREWS_TILT_CALCULATE. These, fresh at least, have a nice…
I do not own the rights to this logo.
FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- Handle for the Gulfcoast-Robotics.com "Y Carriage" Y-axis tray holder…
Intended for use with the Gulfcoast Robotics Premium White LED Light Bar, this printable dimmer switch bracket provides a simple, yet clean mounting solution. It's compatible with 4040 (40mm) wide dual slot V-extrusions. used on the on…
Note: I'm pretty confident this can not be 3d-printed at this scale. I made the model for reference, not for printing. I recently acquired a Gulfstream Electro-Mechanical pinball machine. I order to do so I had to ship it, and in the…
See the new and improved revised model here. Extended cable clip to work with the Gulfcoast Robotics Z-axis Linear Rail Kit ; this is a little deeper, retaining the cable fully. This was modeled off the original file from Gulfcoast…
Retro Artistic Rendition of Planetary Engulfment. Feel free to figure out a better way to orient, spit and slice this beast. I would not necessarily go with my g-code. its just there as a starting point.
I recently switched my Ender 3 S1 Pro over the Gulf Coast Robotics 3-point Y Carriage and after installing, realized I had no handle for the bed. I wasn't a fan of either handle Gulf Coast offered. I liked the original handle from the…
Since Gulf Coast Robotics is no longer in business, I thought I would share the stl files and instructions for their X, Y, and Z linear rails for the Ender 3 S1 Pro. The linear rail guides, drill template, and the ribbon cable holder are…
Formula 1 Gulf Air Bahrain circuit with elevation and DRS detection zones. Can be printed as it is, or scale it to 120%, with 0.4 (or 0.2) nozzle.
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Gulfstream G650 Business Jet Wall Art Silhouette model. Adjustable size. I accept model suggestions.
This piece helps to slightly elevate the wire sheath for an Ender 3 S1 with the bed upgrade from Gulf Coast Robotics. I used M3 screws to tighten down & hold the piece in place. It's a friction fit, but if you're feeling adventurous like…
I've got an original Ender 3 with the 2040 Y gantry instead of the 4040 Y gantry. There are virtually no easy-to-use dual linear Y rail kits that work with the 2040 rail. I had bought a Gulfcoast Robotics 3-point carriage , and realized I…
EDIT: The company that made this lightbar is out of business. I am leaving this up in case anyone still needs it. This will allow you to mount the Gulfcoast Robotics LED Light Bar on the top rail of the M5. It is almost a perfect fit end…
This is a remix of this design: Ender 3 S1 Gulf Coast Bed Cable Raise by Sixpack99 | Download free STL model | Printables.com Absolutely love the original design this is based on. Probably one of my favorite mods for the Gulf Coast…
This is a case project for a Raspberry Pi 4, with a Low Profile Ice Tower Cooler (amazon # B07ZV1LLWK), and has an optional mount of a .9" OLED screen (amazon # B0833PF7ML). Notice the orientation of the standoffs and how they screw into…
Multipass Mulitcolor (Single Extruder) coaster with GULF Logo To print use “make anything”s Multipass Multicolor using Prusa Slicer tutorial. It is very easy! ;) Printer: Creality Ender 3 S1 Pro Slicer: Prusa Slicer Rafts: No Supports: No…
Back in the 60's Gulf ran a No-nox (no knocks i.e. pinging, detonation, etc) campaign for their gas that said it gave your engine extra kick. The ad ended with a couple clink clanks accompanying horseshoes as though a horse kicked a…
Modular spice jar/contianer holder for IKEA Gulfdisk/Citronhaj. Can be expanded to both hight and width. Just use simple connection links. And finally add legs for additional support.
I have been looking for a lightweight, dual fan, simple part cooling solution for quite some time. This model meets all those criteria with one, small but notable, exception; it won't fit a Gulf Coast Robotics All Metal Hotend, which is…
I bought the Goldcoast Robotics LED light bar for a Creality Ender 3 Pro and did not see they had a switch mount available, so I made my own from scratch. I list it as a remix as mine is similar to their original but has different screw…
BASIC INFORMATION: The Argon Mini Fan (Amazon # B08HLX9WRV) is a pretty decent little cooling solution for the Raspberry Pi 4. Especially if you're not overclocking and don't need maximum cooling. They're low profile and low cost ($10USD…
Created this remix for the Linear Rail made by Gulf Coast Robitics
REVISED - Extended cable clip to work with the Gulfcoast Robotics Z-axis Linear Rail Kit ; this is a little deeper, retaining the cable fully. This was modeled off the original file from Gulfcoast Robotics, and fits the Z-gantry…
VTES Edge models for the Gulf Coast Roast 1st Leg, Fire Dance, and Wind Dance tournaments
The original camera arm kept hitting my hotend, so I made the arm slightly longer and a modification that allows me to design and snap-on different arms without having to remove the entire bed to do so.
My Ender 3 S1 Pro has been upgraded will Nathan's modder board (Nathan Builds Robots, NBR) and Gulfcoast's x-axis linear rail kit. The issue this remix solved was that the original design was making contact with the right vertical pillar.…
For the LED Bar here (Ender 3): https://gulfcoast-robotics.com/products/24v-premium-led-light-bar-upgrade-creality-ender I wanted to mount this on the rear instead of the front, so made these up. Requires unsoldering/resoldering the leads…
I really like the Gulfcoast Robotics LED light that's been on my Prusa MK3S+ so while perforing the update to a 3.9, I updated the brackets to move the light out of the way of the extruder/hot end when it moves to the top of the frame.…
Y-Axis_Motor_Mount, Gulf Coast Robotics linear rails on a Ender 3 S1 Pro Category: 3D Printer Parts
Update 01-28-21: After breaking this several times I've redesigned it to have a slightly more snug fit, room for cable management between the mount legs and hopefully be a bit stronger. I've left the original design in here in case anyone…
I've got a bunch of stuff attached to my top extrusion so I can't use the included brackets. However, as shipped they aren't wide enough to work with the vertical extrusions. Remove the existing bracket and replace with this printed part.…
This is attaches the dimmer switch for a Gulfcoast Robotics light bar to the frame of an Ender 5 Pro 3D printer using a simple clip - no screws are necessary. This is a remix of the switch holder by gulfcoast_robotics and the frame clip…
Contact Name: James M. Salvant [email protected] School: Gulf Shores High School BEST Hub: Emerald Coast BEST Robotics - University of West Florida Highlights: This is a single chamber design that can be used as a stand alone system that…
I really like the Gulfcoast Robotics LED light on my Ender 3v2 so I designed these brackets to fit my Prusa i3 MK3S+. These will fit other models as long as the frame size is the same. These are meant to be functional and not pretty since…
Z-Axis Cable Clip, Gulf Coast Robotics linear rail on an Creality Ender 3 S1 Pro Category: 3D Printer Parts
My Ender 3 S1 Pro was upgraded with Gulfcoast Robotics 3 point carriage and now needed a new handle. Since I'm using a Sonic Pad, I decided to include mount points for the resonance sensor and camera. I used heatset mounts for the sensor…
Picked up a LED light for my printer from Gulfcoast Robotics but since the Elegoo Neptune 2 doesn't have a slot on the front face of the extrusion I had to design these clips to attach it to the printer. They just clip into the slot on…
HMCS Terra Nova, Protector, Athabaskan
The mount Gulfcoast Robotics provides is intended to go on the back of the vertical rails, but I don't have space for that. At the same time, it can't go too far from the LED bar because the length of cable is pretty short. Prints with…
Ender-3 S1 pro Gulf Coast Ribbon Cable Holder. I did not care for theirs so I designed my own. Category: 3D Printer Parts
The holes in my carriage didn't match the schematic so I made a simple handle to fit my needs. https://a.co/d/2ZAlVh9 https://a.aliexpress.com/_mPIRC5h BOM 2x M4x8
I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough to my taste. So picked 60 to match Klipper minute:second approach when using SCREWS_TILT_CALCULATE. These, fresh at least, have a nice…
Gulfstream G650 Business Jet Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Gulfstream G200 - like model Pretty realistic Requires suppots can be printed single color or with multi-color systems
3D printable topographic miniature of Gulf Harbour - 🇳🇿 New Zealand Capture the beauty of Gulf Harbour 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates -36.619,…
Design Concept This 3D printed Gulf Racing Sign captures the retro essence of classic motor racing. Inspired by iconic Gulf Racing livery, this piece is designed to evoke nostalgia and admiration among enthusiasts. Purpose Ideal for car…
I used 1.01 Flow Rate I slowed speed to Silent for the Face and came out way better than using standard .04 Nozzle @ 20% Adaptive Cubic or Gyriod Infill Use Textured Plate Face Down Printed with a Bambu X1C with AMS and Bambu Filament
Gulfstream 650 aircraft, used in executive aviation. One of the best category airplanes. This assembled replica is 30 cm long, but can be staggered to the size you want.
