Ender 3 S1 / S1 Pro heating bed cable chain/holder + gulfcoast heated bed prototyps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable guide for the heating bed cable of the Ender 3 S1 and S1 Pro. Plus prototypes for use with a gulfcoast heated bed.
- Ocena
- 5 / 5
- Polubienia
- 575
- Pobrania
- 3523
- Wydruki
- 67
- Wyświetlenia
- 16 746
- Oceny
- 55
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Be one of ten who leave a Like at Printables and support me with it :)
Prevents cable breakage at the housing outlet and rubbing on the Y-axis motor.
It can be attached to the underside of the housing and to the recess for the stepper motor.
I only needed support and brim for the ground plate, I have attached a picture for this purpose. The rest of the parts can all be printed without support and brim.
I did the customization for the S1 together with Bluegooglueygley. If something still needs to be adjusted, please contact me ;)
For the base plate of the S1 you can use a M3 screw or just a piece of tape to fix it to the bottom of the case.
I added prototypes in collaboration with John Fleming for use with a gulfcoast heated bed.
Quantity:
1x Ground plate
1x Hook
1x Chair link end
3x Chair link
4x Clip
Walls: 3
Infill: 10%
Layer: 0,2mm
User DKVisions has created an adapter in case someone wants to run the cable chain all the way to the print bed.
