Peugeot 308 windshield washer fluid tank cap (maybe other models/makes also)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print with TPU or some other flex/semiflex material. Go slow with logo, or preferably print the nologo -version…
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 350
- Wydruki
- 1
- Wyświetlenia
- 1796
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Print with TPU or some other flex/semiflex material. Go slow with logo, or preferably print the nologo -version without the nitty gritty small details.
Test fit showed a good tight,but not too tight fit.
edit: 9.3.2018 - added a version with a hole for releasing possible pressure and a lip for ease of use ( the lip adds the amount of support in print so use if necessary, works fine without it )
edit 26.2.2019 - no signs of wear or degradation of TPU although i splashed quite a few times some alcohol/soap mixtures over it during the winter.
Category: Automotive