1 / 2
Peak Design Capture Camaraclip to Velbon P-MAX tripod conververt — zdjęcie 1
1 / 2

Peak Design Capture Camaraclip to Velbon P-MAX tripod conververt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use your PD Capture camera clip mount on a Velbon P-MAX tripod

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Having a Peak Design capture camera clip and an Velbon P-Max tripod, I had some issues when using the tripod. The size of  the Velbon mount is 42mm and the one from Peak Design is 38mm. 
So you can't really fit the camera tight to the tripod.

Tried several things from overdesigned (too complicated to print) to basic (this one).
No need to remove the printed converter, you can let it in the bracket of the tripod.
And when needed, you can slide the Peak Design bracket into the printed part on the Velbon and lock it.
(Don't forget that !!! Lock if firmly !!!)


Printed it with eSUN PETG, but ABS or ASA should also be fine.
 

Layerhight: 0,15
Infill: 20%
Parameters: 3
Support: Yes, Organic

Note 1: Print it as the model is, so on one (that!) side. 
Note 2: I'm using it for my tripod and camera (Canon 750D, battery grip and Tamron 18-300mm lens, total of 1,5 kg, and no problem. Use it at your own risk!)



 

Tagi