1 / 2
Peak Design Capture Camaraclip to Velbon P-MAX tripod conververt — image 1
1 / 2

Peak Design Capture Camaraclip to Velbon P-MAX tripod conververt

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Use your PD Capture camera clip mount on a Velbon P-MAX tripod

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
80
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Having a Peak Design capture camera clip and an Velbon P-Max tripod, I had some issues when using the tripod. The size of  the Velbon mount is 42mm and the one from Peak Design is 38mm. 
So you can't really fit the camera tight to the tripod.

Tried several things from overdesigned (too complicated to print) to basic (this one).
No need to remove the printed converter, you can let it in the bracket of the tripod.
And when needed, you can slide the Peak Design bracket into the printed part on the Velbon and lock it.
(Don't forget that !!! Lock if firmly !!!)


Printed it with eSUN PETG, but ABS or ASA should also be fine.
 

Layerhight: 0,15
Infill: 20%
Parameters: 3
Support: Yes, Organic

Note 1: Print it as the model is, so on one (that!) side. 
Note 2: I'm using it for my tripod and camera (Canon 750D, battery grip and Tamron 18-300mm lens, total of 1,5 kg, and no problem. Use it at your own risk!)



 

Tags