57 models
I have a tripod with the Velbon QB-4W Quick Release Plate. So I remixed these two components together to have a cell phone mount for my Google Pixel 2. A bit overkill for what I needed, but a fun little project. Supports are not required…
I needed an extra quick release plate and this seem to have been discontinued, so I drew up and simplified the one provided for my UT-43D II tripod with QHD-53B ball head. This replacement will fit a range of Velbon tripods (mostly of the…
Couldn't find quick release plate compatible with my Velbon Sherpa 250 so I have designed my own. QB-157.stl - first version - cavity for screw head is about 5mm. QB-157 deep.stl - cavity is deeper for bigger hardware. Print instructions…
This is a quick release plate for an ancient (mid/late 1980s) Velbon Victory 480 which uses a QB-5L quick release plate. It should work for any Velbon tripod that uses a plate with the same dimensions. Print Settings Printer: Ender 3 Pro…
This is a quick release plate for a Velbon tripod. It fits my Velbon T-3500 tripod, but it will likely work for other model tripos as well. Note that the plate requires the addition of an appropriate sized screw or bolt to fit your camera…
Also leaving my quick release behind so I printed a spare. Print 100% solid (really it's not that much material and you want it strong). You need support for the inset, this inset is for an E-clip used to hold the 1/4-20 screw in place so…
The cam-lock sleeve for this type of tripod can break after a while, and it seems a shame to discard the whole thing for want of a small piece. This will replace the upper locking collar on the "Velbon" Challenger 3 tripod at any rate. No…
This phone holder was made specifically to fit the quick release plate mechanism on my Velbon T-3500 tripod, but I expect it will work on other similar models of tripod. Note : If you like this print, you may also be interested in this…
Velbon QB-4LC remix - Quick Release fits the Videomate-400, CX-430, CX-440, DF-10ML, DF-40, T-3500, and V5000 tripods, and needs a 1/4"-20 camera screw. A quick release plate can be kept attached to the camera's base and allows the user…
Velbon QB-46 tripod camera mount Fits: EX-430 EX-440 EX-530 EX-540 EX-630 EX-640 EX-440 EX-888 EF-51 EF-61
Velbon D450, D500 Tripod Quick Release mount. Base is 48 x 58mm. Print Settings Printer: Tronxy D01 Rafts: No **Supports:** Yes Resolution: 200 **Infill:** 20% Triangle Filament: ESUN PLA + Blue How I Designed This ===================…
Velbon QB-46 tripod GoPro mount. Fits: EX-430 EX-440 EX-530 EX-540 EX-630 EX-640 EX-440 EX-888 EF-51 EF-61
Replacement release clip for Velbon tripods D700 but I'm sure it will fit other Velbon models as well Category: Hobby
I made this quick release plate for my Velbon DF-60 / DF-61 tripod, to make it work with my Hadley telescope and the tripod adapter made by Gyoenastaader .…
If your projector or tripod is different you can download the models of HY320 or Velbon Tripod head and change the design for yourself. Be careful about SUPPORT , it was so hard to take them of. You can print vertically. I printed…
I have designed some replacement clamping plates for Velbon videomate tripod with PH-358 head now you don't have to buy another overpriced replacement but you can print your own. I've recorded several versions and one without the holes so…
Velbon Quick Release Platform 42mm Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.20 Infill: 100% Filament: Polymaker Polyflex PLA Black Notes: Velbon Quick Release Platform 42mm Category:…
Works well with official Velbon baseplates as well as some 3D-printed ones (I use this one). It's very sturdy, even without the spring with just friction. I still wouldn't trust it with anything very heavy. Use at your own risk! Assembly…
Replacement for worm gear which in my case got a few teeth rounded
Destička QB-157 pro stativ Velbon Sherpa, bez závitu. === Plate QB-157 for Velbon Sherpa tripod, without thread.
Velbon EX-640 quick release plate. I use a M6 DIN7991 screw. If you need another screw type, please ask in the comment. Category: Camera
This is a quick release plate to mount a GoPro on an ancient Velbon Victory 480 which uses a QB-5L quick release plate. It should work for any Velbon tripod that uses a plate with the same dimensions. The plate will accept the official…
This is a remix of bpienig's excellent model which I found did not quite fit my rather geriatric tripod. In this remix the “wedge-shaped” foot has been enlarged slightly. The 3mf includes 100% infill for for the “foot” as this is what the…
Needed some way to hold a calibration microphone and had an old velbon 370CX(?) stand lying around, so I designed this thing to help me calibrate my speakers without having to buy a dedicated microphone mount. I'd imagine the size is…
Replacement of the Velbon CX 440 Release Lever, and strengthened compared to the original. Might fit other tripods.
Velbon CX 460 crank handle replacement part.
This is a center replacement part for the Velbon CX 680 tripod. As the plastic nubs on the legs that connect to the center part tend to break easily, this model has been designed so that the 3 legs of this center part must be drilled out…
This is a Velbon DF-50 Tripod Shoe for mounting things on your Velbon Tripod. I created this to mount a suitcase photobooth on my tripod. It has recessed holes in the corners for hardware to mounts. I used ¼ inch threaded inserts and ¼…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/e5WHeALyMA6 In the free space for fixing the camera it is best to insert a rubber (63x46x2mm). The springs I used for the blocking pin have dimensions of…
Velbon Sherpa 435 quick-release cube replacement. A screw to attach the camera needs to be supplied.
Tested with Nanlite Lumipad 25 and Velbon EX-530, but the same quick-release plate (QB-46) should work on other Velbon tripods, and the Lumipad half might work for other models. Printed with PETG using slightly higher infill (30%), seems…
I broke the old one so i made new
The handle fell off my old tripod because the part that goes here broke. I finally had the skill and tools needed to repair it. So, I did. The teeth aren't perfect because they aren't level across the top, but I couldn't figure out how to…
Background This christmas my father got a Bosch Cross Line Laser that could be fitted to our tripod that my parents bought with a SLR camera to take the obligatory christmas photos. We needed some neat way to store the cross line laser,…
Velbon DV-10N tripod head. My original one broke so I made this to savage the tripod.
Tripod shoe extender 100mm for Velbon tripod. I designed this for Velbon DF50 tripod to do the overhead shot. But I think it will work with any velbon tripod. Just cut the “slide in” portion and test print it. Design is too simple so you…
A set of printed parts for connecting a 10in ring light i purchased from ebay to the bottom of my DSLR camera witch then connects to the quick disconnect of the Velbon S-6000 tripod i had keeping the light mostly infront of the camera…
Statív VELBONE DV7000 držiak káblov
Background This christmas my father got a Bosch Cross Line Laser that could be fitted to our tripod that my parents bought with a SLR camera to take the obligatory christmas photos. Although the tripod has got a new use case we needed…
Remixed baseplate for Mobile Phone Holder for Velbon Tripod by kaje
To connect a PICTRON Smartphone Adapter to velbon CX-640 Tripod. The adapter slide into the QR plate and is secured by a a D Shaft D-Ring 1/4" Tripod Screw . Printed with Carbon Fiber infused PETG at 80% infill for maximal strength.
Replacement for Sliding Center and Arms for Velbon Tripod CX 540
Just a Velbon CX540-compatible QR plate, but with an openscad file that makes it easy to tweak.
The Velbon Ultra LUXi L III tripod uses Velbon’s QB-62 quick-release plate, paired with the Velbon QHD-53D ball head. The Capture Clip plate uses Peak Design's own proprietary mounting plate. This mashup plate makes it possible to use…
Use high infill, as this is a structural part. Pick a material that is suitable for outdoor use, such as PETG.
Replace the regular Velbon Quick Release (QR) plate (QB-5LC Quick Disconnect Plate) and Sony GM Lens Foot with a single part, and insure straightness. Printed with Carbon Fiber infused PETG at 80% infill for maximal strength. After…
Having a Peak Design capture camera clip and an Velbon P-Max tripod, I had some issues when using the tripod. The size of the Velbon mount is 42mm and the one from Peak Design is 38mm. So you can't really fit the camera tight to the…
I printed with high-quality polycarbonate for the best strength. My Prusa MK3S+ with a homemade enclosure printed it effortlessly. I’m using the screw in the picture to lock it in place.
So, bought a new camera and found that the battery only lasts for about 600 shots or so before it's depleted. However the camera will shoot while hooked up to a external USB Battery pack. Since I have a tripod quick release on the bottom…
Tray for the Velbon Stratos 470 tripod, I needed somewhere to mount my rear speaker, and this works for me. Don't know if there are many other uses for it.
My Velbon T-3500 tripod has a nice quick-release mechanism, but another older tripod lacks this feature, so I made this "socket" which attaches to the tripod with the standard tripod screw (1/4"-20 thread). This print requires these…
The original plate base dimension is 45.1×44.2 mm. Thanks @PavelLukes for precisely modelling the Peak Design plate , which served me as a basis for this model. The Peak Design plate snaps tightly into the adapter, there are little to no…
This improves on the original part by allowing the tightening screw to run in a metal nut instead of straight into the plastic, increasing strength and avoiding one of the sources of cracking that happens to the original piece.…
Use high infill, as this is a structural part. Pick a material that is suitable for outdoor use, such as PETG.
Tray for the Velbon Stratos 470 tripod, I needed somewhere to mount my rear speaker, and this works for me. Don't know if there are many other uses for it.
I printed with high-quality polycarbonate for the best strength. My Prusa MK3S+ with a homemade enclosure printed it effortlessly. I’m using the screw in the picture to lock it in place.
![[OpenSCAD] Parametric Velbon Quick Release Shoe + 3/8 Microphone Adapter Thumbscrew](https://media.printables.com/media/prints/349441/images/2970486_b4622e24-bce6-4671-9cb9-7a7c20a88e88/1672022477339.jpg)
