Lightweight Gridfinity PCB/module bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2x2 bin that holds a variety of PCBs and PCB-like things such as Arduino modules and microcontroller boards
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 348
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This holds all sorts of PCBs. Devboards, Arduino modules, protoboards, breakouts, and so on. Pretty much self-explanatory. Pack them densely or less densely depending on whether you care more about storage or about retrievability.
Only about 30 grams of plastic is needed for this bin, and it prints pretty fast. No supports needed. Recommend using a good PLA+ or better, due to the reduced wall width (for plastic reduction). But in a pinch, normal PLA should do, it just might not last as long.