20mm V-slot to linear rails coversion alignment helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this tiny print to be a helper to properly get my MGN12 rails lining up with V-slot profiles
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I created this tiny print to be a helper to properly get my MGN12 rails lining up and getting a proper suport on my V-slot to linear rail modification. The small print is intended to mount to the linear rail with a M3 screw (Tap needed) or a self tapping 3mmx8mm skrew. I suggest using a taper head screw since the mounting hole in a MGN12 rail is a bit over sized for a 3mm screw and the taper helps to alighn it properly.
Tool is supose to stay in build so chose print material in acording to use and envioramenteal temperatures.
Intendet for 3D printer use and one guide on every 2nd guide rail hole (T-nut and propper fixing screw in between).
More fun at stockholmviews.com