1 / 6
Ikea Frosta 3D Cushion ft. Gyroid Infill — zdjęcie 1
1 / 6

Ikea Frosta 3D Cushion ft. Gyroid Infill

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ikea Frosta stool cushion with TPU gyroid lattice – 4 interlocking tiles, bike saddle-inspired comfort 🪑✨

Ocena
0 / 5
Polubienia
12
Pobrania
41
Wydruki
0
Wyświetlenia
293
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Inspired by those insanely expensive 3D-printed lattice bike saddles, I decided my humble Ikea Frosta stool deserved the same futuristic comfort treatment. So… here’s a 3D-printed lattice cushion you can make yourself with some flex filament!

I designed a 30 cm diameter seat cushion, split it into quarters so the print fits most printbeds, in the end creating interlocking tiles that can easily be glued to your Frosta. I spend quite some time on my Frosta and I can not live without the padding anymore :) 

⚙ Print settings

Layer setup: 2 bottom layers, 0 top layers, 0 perimeters.

Infill type: gyroid (but honeycomb, cubic, or others could look cool).

You can tune softness by adjusting infill %:

Materials I tested:

🔵 eSUN TPE 83A @ 12% infill → much softer and comfier, yet no sagging through (I’m 80 kg) (first 3 pictures).

🟠 eSUN TPU 95A @ 7% infill → quite firm, like sitting on a dense gel pad (last 3 pictures).

🟡 Yet to test: 85A TPU 

Regardless what you choose, I would love to hear your infill amounts and experiences! Clear/transparent or colourful filaments could make the lattice look even better.

Tagi