Simple Loc-Line Inspired Camera Mount for 30mm Extrusions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed to fit 30mm aluminum extrusions with 8mm slots such as what you find on most Prusa printers today.…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 583
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is designed to fit 30mm aluminum extrusions with 8mm slots such as what you find on most Prusa printers today.
All that is required besides a few segments of Loc-Line (11.8mm balls) is a single 10mm M4 bolt and a couple zip ties. A printable drop-in T-nut is included.
You can attach the mount to your frame with zip-ties, or a single M4 bolt and T-nut depending on your setup.
Any USB or Raspberry Pi camera can be attached with either zip-ties, large heatshrink tube, or double sided tape to the camera mount. You can also use any other loc-line camera mount you desire.
The models also feature holes on either end of the LocLine so you can run wires through them cleanly.
Category: 3D Printer Accessories