Sew-on Maker Chip Display Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wear your maker chip collection like you would patches!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Put that chip on your shoulder with a printed chip holder! Make a ‘battle vest’ showing the different makers you've met, or a collection of your own chips evolving over time. Maybe a hobby collector's utility belt, with a set of chips using different techniques.
This holder has a protective channel, a satisfying snap-in fit, options for open or closed bottoms, and a reverse viewing window. It can be generated in any length you can print, and lengths 1-3 chips long are included.
The thread channels fit a curved upholstery repair needle with a radius of about 15.5mm / 5/8".
If your maker chip does not have the standard 40mm diameter, you can generate a ‘fit test’ version of the channel, which will let you dial in for your chip and your printer.
Color logos are for the shops at https://asmbly.org/ makerspace!
If you don't have a maker chip yet, you can make one here: https://www.printables.com/model/833838-makerchip-maker-chip-the-new-maker-coin