Sew-on Maker Chip Display Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wear your maker chip collection like you would patches!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Put that chip on your shoulder with a printed chip holder! Make a ‘battle vest’ showing the different makers you've met, or a collection of your own chips evolving over time. Maybe a hobby collector's utility belt, with a set of chips using different techniques.
This holder has a protective channel, a satisfying snap-in fit, options for open or closed bottoms, and a reverse viewing window. It can be generated in any length you can print, and lengths 1-3 chips long are included.
The thread channels fit a curved upholstery repair needle with a radius of about 15.5mm / 5/8".
If your maker chip does not have the standard 40mm diameter, you can generate a ‘fit test’ version of the channel, which will let you dial in for your chip and your printer.
Color logos are for the shops at https://asmbly.org/ makerspace!
If you don't have a maker chip yet, you can make one here: https://www.printables.com/model/833838-makerchip-maker-chip-the-new-maker-coin