1 / 2
Simple rod mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple mount for rods
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a simple holder for rods of different diameters. These are designed with the exact fit of the rod, so it would be a press fit to prevent the rod from rotating. We mounted ours with double sided tape, but added a mounting hole in the center.
Let me know if you want different sizes.
The model(s) on the pictures is printed with the following settings
| Material | Bambu PLA Basic |
|---|---|
| Infill | 15% |
| Infill Pattern | Gyroid |
| Supports | Depends |
| Orientation | Mine was printed standing up, so I used supports |
| Adhesion | Mine was printed standing up, so I used a small brim |
| Date | Comment |
| 2025-09-21 | Published model |
Please message me if you have any questions, ideas or improvements to any of my models.