Sherma High Hat - Hollow Knight: SilkSong
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The hat that Sherma wears.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 585
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Share Alike
Attached is the STEP file and STL for a 215x215 sized Sherma's hat. If you want a bigger hat, feel free to use the model and cut or scale it up. The way this model is currently sized, it will only fit on a tiny child's head.
Just be warned, this model is NOT easy to print. It is probably the most non-optimal model in existence, it used almost as much filament making supports as it used to print itself. It is all steep overhangs and I'm honestly shocked that I even finished printing it before my printer threw itself into the ocean.
I recommend cutting it in half, printing it as such then gluing it together afterwards. I do not recommend doing what I did at all.
There are some handles underneath to help you attach some kind of strap like a helmet, but these aren't too hard to remove or modify in the STEP file.
If you MUST print it in one piece like myself, at least remove all supports from the internal handles, as you risk ripping them off with your massive supports otherwise. Just keep the supports outside of the handle holes.