Liczymy pasujące modele…
First 2024 design in my Bookmark Tanks Collection! For this design I tried to capture little more details in the model without losing simplicity. I hope you like it! Introducing Sherman M4A1! Sherman M4 bookmark for those thrilling war…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
CHECK OUT v2 AT: Sherman M4 - Kitcard von Crea_Hicks | Kostenloses STL-Modell herunterladen | Printables.com Just a simple sherman Kit Card. Easy to assemble and easy to print.
Model printed entirely in PLA, given the abundant quantity of details, I recommend a print quality of 0.1 for the small parts and 0.1 or 0.15 for the remaining parts. No screws are required for assembly but only pieces of 1.5mm wire to…
An easy to print and fast to assemble Sherman M4 Kitcard! No supports and no raft needed Print it with a small layer resolution (<0.1mm recommended) to get the best results
Check out Rev 2 of this if interested in this model. Summary This is a 1/20th scale Sherman tank, a rolling model. Tried to make it look like the late model upgunned versions. I was not trying to create a historically correct model, just…
Man fishing on classic benchy
From Hollow Knight: Silksong , here are 4 characters: Hornet, Bell Beast, Sherma and Quirrel. Please remember that each character must be 2.35 mm thick. If the stand is not able to hold the character, you can also use a little glue. Hope…
A very nice looking tank that can be easily assembled and glued together. Only the turret requires support. Print instructions print at 0.15 mm layer height with 20% infill. The turret and the hull require support.
This is a 1/20th scale Sherman tank, it is designed to add motors and RC control. Tried to make it look like the late model upgunned versions. I was not trying to create a historically correct model, just a model that would be reasonably…
can be printed together the model needs to be glued together or separately in other colours the M4 Sherman tank is very realistic Print in place kit card , Assembly required need to use a support the cabin can be rotated 360 degrees
-Two colors -organic support -0.15 layer height
Char Sherman M4A1-Early echelle 1/33 Tourelle et canon mobiles Chenille et galets mobiles Assemblage des pièces fixe avec de la colle (Pattex Spécial Plastique) Impression en PLA Chenille composée de 76 maillons relier par fil de fer…
Tiny Tank – Sherman M4 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and back part to the main body. Comes in three versions: M4A1 M4A2 M4A3 To scale a model from 1:200 to 1:144,…
Fishermans Tackle Box the perfect box for fishing accessories. Use an M2x25 screw and nut for the handle or whatever fits. Size: 150x95x35mm
A mighty owl-man adventurer with natural stealth and night-vision. Collect them all! Recommend 3 walls and just be careful with the pole when you take off supports. Check out the FULL COLLECTION HERE:…
The M4A1 Sherman is the first variant of the early-generation Medium Tank M4 (Sherman) family. The M4 Sherman medium tank, named after the great American Civil War general William T. Sherman, was one of the Allies' most iconic fighting…
hello there here is my second tank the american tank m4 sherman i have split it in 4 parts so you can print it easy i have also add the stowage to the vehicle so you can customise it i have a whole 3d printed army of american sherman…
A simple wall decor for the house. I printed the different colors by using layer height.
The entire process rigorously tested my patience and attention to detail, and the effort I put in shone through in the outcome.
Hello All, This is a more or less 1:30 scale (estimated) full model of the movie tank "Fury". Let me first start of with giving credits to "Jernej Primon" on My mini factory for his excellent " Articulated Tank from Fury"…
This version of the Sherman would be the base for what would be the final Sherman in US Army use, seeing action all the way out to the Korean War in US Army hands. This tank had a welded hull just like the M4, A2, and A4, but used a new…
Two-tier fishing storage table for small accessories. water drainage holes added. To connect, I recommend small screws with a nut and do not tighten hard. Attachment to position for 3 rods. Supports only for the small support cubes inside…
The M4A2 Sherman is the third variant of the early-generation Medium Tank M4 (Sherman) family. In April 1942, the M4A2 was designed with a new General Motors 6046 engine (two GM 6-71 General Motors Diesel engines combined together),…
CZ : Vrchní dekorace která nesmí chybět na dortu každého dobrého rybáře při oslavě narozenin. Stačí přidat kousek vlasce a rybku přivázat na prut Tisknuto PLA EN : Top decoration that must not be missing on the birthday cake of every good…
Practical tools offering countless uses. The pearl is pulled over to the main cord through the hole in the middle, you can connect swimming, lead, hooks, etc. to the hole on the protruding ear. depending on the fitting.
Introduction Everyone who has bought a packet of Fisherman's Friend knows how useless the little paper bag is to get the mints out of. You could transfer them to a small tin but then you have to deal with the rattling sound. Instead I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
u have to heat up the tracks to curve it around the turret, like put a hot glue gun on the tracks for a bit to shape them.. it works really well but just dont over-heat it
sick of trying to orient a round object that only goes in 1 way by holding it on the end of a wet spaghetti noodle from 4 inches away? This is the way it should have been made to begin with but 3d printing to the rescue. print in tpu…
Prototype for Sherman S Headlight mask. Helps cut light from shining into oncoming traffic as well as helps protect against small scratches. Also makes the SS look mean. Print in TPU.
Printed on ender 3 S1 0.3mm layer level Resize as you wish I recomend a 1mm thickness or more to ensure its strong enough
Diese 3-teilige Dose passt im Auto perfekt in einen Cupholder und lässt sich durch den Drehverschluss einfach öffnen und schließen. Die Dose kann man natürlich auch für andere Inhalte und Standorte wie z.B. den Schreibtisch oder die Küche…
Scale: 1 : 30 Vehicle type: Medium tank Model for 3d printing Design refer to War Thunder.
Remix of this thingiverse model The original would fall over sideways unless the wheel was perfectly aligned. I gave it a wider base and changed the bolt holes to all be M4x30mm, shorter bolts will also work. Print the sides with the…
Fisherman with Swirling Fish Wall Art
Sherman tank track type: T54E1 !!!!!!!!!! like and follow !!!!!!!!!!!!!
This anglerfish wall mount prints in two parts: the skeleton and the backplate. I printed the fish in translucent Carmine Red PETG and the plate in Bambu’s black basic PLA. After printing, I dry-brushed the wall mount to give it a…
A posing fisherman. Hope you like it.
English Thank you very much for downloading this model, this miniature for me is very special because it is my second miniature totally sculpted by me, with hours of work and dedication. Soon I will be uploading a whole collection of…
Small box for storing my mints while biking or hiking. Hardware: 4x M3x30 Screw Seal and HookLoop are printet in TPU.
The M4 Sherman , officially medium tank, M4 , was the most widely used medium tank by the United States and Western Allies in World War II . The M4 Sherman proved to be reliable, relatively cheap to produce, and available in great…
Took inspiration from https://www.printables.com/@Jerryie and started cutting up vehicles from https://www.thingiverse.com/thing:3553160 It is scaled to 1:72 same as https://www.printables.com/@Jerryie tanks. Has different guns you can…
Took inspiration from https://www.printables.com/@Jerryie and started cutting up vehicles from https://www.thingiverse.com/thing:3553160 It is scaled to 1:72 same as https://www.printables.com/@Jerryie tanks. Has different guns you can…
Fisherman Fishing Wall Art
The M4A3E8 "Easy Eight" was one of the most advanced variants of the famous Sherman tank used by the United States during World War II. Equipped with improved suspension, wider tracks, and a high-velocity 76 mm gun, it offered better…
Serman Firefly Tank Detailed 3D model of the legendary Sherman Firefly, the British-modified Sherman equipped with the powerful 17-pounder anti-tank gun used during WWII. This model was designed for display and printing, with attention to…
might require a bit of support
M.A.S.H. - Colonel Sherman T. Potter - 1972-1983
Carved Fisherman – Folk-Style Coastal Figurine Bring the charm of coastal craftsmanship to your 3D prints with this carved-style fisherman. Designed to look like it's been hand-whittled from wood, this model captures the essence of an old…
this is a conversion for a m4a1 Sherman with cast hull into a Israeli ambutank. STL include a new turret now engine bay, rear bay, stowage boxes, and extra handles for when they inevitably brake off. WARRNING this conversion requires some…
this is a turret for a Canal Defence Light sherman made in cooperation with panzerserra (Marcos Serra) please check out his blog here http://panzerserra.blogspot.com This is for a italeri 1/35 M4A1, but please let me know the turret ring…
Hope you have fun with this. I now finally has a model of a tank that I can print so I hope you enjoy it as much as I do. Print the tracks twice. Place the turret bushing in the turret before pushing it in to the hull. The Turret cover is…
Changes: 11/18/2023 - added mantlet part and updated instructions 1/2/2023 - original upload Parts: The cannon support is fixes the cannon the in forward position The muzzle brake looks more accurate to real life and directly replaces the…
I printed this with 4 walls which is probably overkill but whatever.
What this fisherman is trying to catch is a mystery. Will you take the fisherman's ring? Ikea Ribba picture frame needed! (13cm x 18cm) PLA 0.4 nozzle 0.12mm 15% infill No supports. 3 parts (no tools for assembling needed)
This is a model of the real hero of Pharloom. It is a challenging print, particularly the thin legs and all the needed supports. But being a Hollow Knight character, you wouldn't expect it to be easy, did you?
I made this file by remixing https://www.thingiverse.com/thing:5358844 with another part not on thingiverse. So far a bottom layer 2 walls thick seems to be good. 10% gyroid infill seems like a good starting point. You can go less for a…
The Sherman V was a British variant of the widely used Sherman tank family during World War II. It was valued for its reliability, ease of production, and versatility on the battlefield, serving in multiple roles across different theaters…
The original model is a good kit. I wanted to see how it looked with a 76 mm gun.
This is a terrific model, I merged the splits to eliminate gluing the chassis. Redesigned the muzzle brake to put actual holes in it. Not sure that is entirely worth it since it then requires supports which are very difficult to remove.
Old fisherman in a boat with a tattered sail Category: People
A simple Sherman tank bookmark inspired by Edy195's ''Tiger Tank Bookmark'', now you can have the Americans on your side while reading books!
Created this seat support to be able to use the Luna seat I was using on my Sherman Max. Simply put velcro on your trolley handle and the seat support. The bond should be strong enough for normal seated riding. I secured the mount with…
A rear fender for a Veteran Sherman. Designed to use flexible filaments, but PLA works okay. Stick it on with strong double sided tape or velcro strips. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Attached is the STEP file and STL for a 215x215 sized Sherma's hat. If you want a bigger hat, feel free to use the model and cut or scale it up. The way this model is currently sized, it will only fit on a tiny child's head. Just be…
My attempt to create a Fisherman for an RPG game. You may need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
The Trolley Lifter is a complement to the trolley handle of the euc Sherman S. With this addition, it will be possible to deploy the trolley with just one hand. El elevador de asa es un complemento para el asa del monociclo eléctrico…
This has got to be my crappiest work. (besides a certain '65 Ford Mustang attempt) Garbage M4 Sherman, definitely printer friendly. Tell me if I should make a better, more printer friendly Sherman in the comments.
Sherman Kickstand and filler plates. !!! WILL NOT FIT MAX OR NEWER!!! This only fits the original Sherman. Clean your bed or use wide painters tape for visual texture - The print bed side is the side that you see! Use double sided tape in…
A fishing trophy that will delight every fisherman-Rybářska trofej která potěší každého rybáře
I hated having to find my pliers after landing a fish so I designed this belt holster for my Rapala Fisherman's pliers. Has great retention but the pliers can still be removed and reholstered one handed. Printed at 0.2mm layer height with…
This tray is for the tank leader games (Sherman and Tiger Leader). The 2 versions vary on thickness to your liking. Allows for easy access to Commander name, commander stats, and the vehicle card. Overlapping cars to decrease the amount…
Protect the headlight of your Veteran Sherman. This slides around the stock Sherman headlight to provide protection in the event of an impact. It also allows further use of accent color. Designed to be printed in TPU or other flexible…
I made this adaptor to be able to mount my night ride light to my Sherman. You'll need two 6x60mm bolts with nuts and washers. I recommend printing this in TPU so it can squeeze the light to keep it from falling down. I also used the…
Armour and stand for Veteran Sherman Electric unicycle. Tried printing out a few of the other designs I could find but was not happy with any of them so I designed my own. Made for my Brother and he seems pretty happy with them. You need…
Simple flotation screen for Sherman DD for tabletop wargaming. Not a scale model, just a simple token for floating DD Sherman tank. Should fit any Sherman model in 1/56 scale or you can cut a bottom of any Sherman STL. Tested with Rubicon…
LOVE this design. Rawnei killed it. I just wanted the flap to be a bit wider and i added some weight to the opposite side to lessen the chance of it getting pulled up in the tire when i hit a bump. Check out all of the other crazy good…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed 3D model inspired by the legendary M4…
This is a remix of https://www.thingiverse.com/thing:5408708 I found that the original model had some walls that were too thin (especially when slicing with a 0.6mm nozzle) I removed the cloud logo. Made the walls thicker and connected…
I bought a new light suggested by Adam @ Wrong Way! (https://www.aliexpress.com/item/4001257478448.html) and the ATV Flood light adaptor print did not fit at all, so instead of solving it mechanically by adding spacers/shims until it fit,…
Original bearing went bad after one winter due to water ingress on bearing. After replacing bearings, I added bearing cover to prevent that happening again. Take this model with grain of salt as I modeled this in hurry without calibers.…
Just be wary, he may look too creepy for any children.
🎣 The Old Sea Dog – Fisherman Bust Add a wave of character to your collection with this rugged and weathered Fisherman Bust ! Supports are needed. I used organic-style supports, which peeled off cleanly with minimal effort. Adjusted the…
