Veteran sherman max bearing cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple bearing cover to keep bearing out of moisture and dirt. Please use updated version as original is too thick.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- GNU General Public License v2.0
Original bearing went bad after one winter due to water ingress on bearing. After replacing bearings, I added bearing cover to prevent that happening again.
Take this model with grain of salt as I modeled this in hurry without calibers. They're now installed but it will probably take a year to see how well they hold up.
Working principle is really simple: marine grease or other really sticky grease keeps water out and cover holds the grease while keeping dust away.
6008-2RS fits for smax
Installation:
- Put sticky grease in the groove.
- Glue both pieces with glue that seals as well. I used rvt silicone that isn't corrosive.
- Wait until it dries and test how it works by spinning the axle. It should not add any noticeable resistance, or make any additional noises.
Additionally you can use a little amount of super glue or quick epoxy to keep it in place when assembling while sealing glue dries up.