Cobi M4A3E8 Sherman Upgrade Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of upgrade parts to improve the looks and functionality of Cobi set 2533 (Easy 8 Sherman)
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 1224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Changes:
11/18/2023 - added mantlet part and updated instructions
1/2/2023 - original upload
Parts:
- The cannon support is fixes the cannon the in forward position
- The muzzle brake looks more accurate to real life and directly replaces the original parts
- The mantlet matches the real-life version used for the 76.2mm cannon used by the Easy Eight (The original part was the 75mm version).
Post-processing:
Parts may require sanding if fits are too tight. Wrap tape around round pieces if they are too loose
Assembly:
Important: do not force parts together if they are too tight, otherwise you may risk breaking them
Unplug the cannon barrel from the original mantlet, and remove the mantlet. Set the two 1x2 plates underneath aside.
Replace the 1x2 sloped tiles at the front end of the turret with the plates you just removed. This will allow the cannon to pitch up and down (left side is original, right side is modified).
Insert the cannon barrel into the new mantlet, and place the mantlet back on the turret.