Cintiq 13HD Vesa mounting bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vesa mounting bracket for Cintiq 13HD (tested with DTK-1301) Re-uses the slots in the back of the display to attach a…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 421
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Vesa mounting bracket for Cintiq 13HD (tested with DTK-1301)
Re-uses the slots in the back of the display to attach a 75mmx75mm vesa-compatible mounting plate.
No modifications required.
Hardware required
- At least 4 m4-20mm screws
- 8-10 m4 nuts (locknuts are optional)
What to print:
- 2x clip.stl
- 1x mountplate.stl
How to install
- Install the m4 nuts in the bottom of the mounting plate (some force may be required as they are slightly undersized: use a screw to hold the nut and wiggle until it moves into place)
- Add one of the clips to the mounting plate (use a flathead screwdriver to stop the nut from moving while tightening the screws)
- Attach the partially assembled mount to the back of the display and install the final clip
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.28
Infill:
35
Filament: Unknown PLA Transparant
Notes:
Print the mounting plate with the flat side down and supports build-plate only
Print the clips with the side down for strength
Post-Printing
Category: Office