Cintiq 13HD Vesa mounting bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vesa mounting bracket for Cintiq 13HD (tested with DTK-1301) Re-uses the slots in the back of the display to attach a…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 55
- Makes
- 1
- Views
- 421
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Vesa mounting bracket for Cintiq 13HD (tested with DTK-1301)
Re-uses the slots in the back of the display to attach a 75mmx75mm vesa-compatible mounting plate.
No modifications required.
Hardware required
- At least 4 m4-20mm screws
- 8-10 m4 nuts (locknuts are optional)
What to print:
- 2x clip.stl
- 1x mountplate.stl
How to install
- Install the m4 nuts in the bottom of the mounting plate (some force may be required as they are slightly undersized: use a screw to hold the nut and wiggle until it moves into place)
- Add one of the clips to the mounting plate (use a flathead screwdriver to stop the nut from moving while tightening the screws)
- Attach the partially assembled mount to the back of the display and install the final clip
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.28
Infill:
35
Filament: Unknown PLA Transparant
Notes:
Print the mounting plate with the flat side down and supports build-plate only
Print the clips with the side down for strength
Post-Printing
Category: Office