1 / 1
Windshield for "JetBoat Hull new Design" by AlexMu — zdjęcie 1

Windshield for "JetBoat Hull new Design" by AlexMu

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple addition for to original model by AlexMu for visual effect

Ocena
0 / 5
Polubienia
7
Pobrania
69
Wydruki
0
Wyświetlenia
442
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

I needed something to make the boat a little nicer than just a plain deck so there is the windshield for that cruiser vibe. Original project: https://www.printables.com/model/496157-jetboat-hull-new-design

It is slightly tapered for better adhesion area. Just use a tiny bit of your glue of choice and place it wherever you feel like it will fit. 

There is still a bit of space left for the deck part but be sure to measure and mark it prior to gluing.

Seems like print settings don't matter too much with this one. 

Enjoy!

Tagi