1 / 5
Logic Puzzle various shapes - level intermediate - Brain teaser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The model presents logic puzzle with various shapes - created in Bambu Studio.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (20)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (20)Powiązane
The puzzles are very simple to print, no support is needed.
Thanks to some tolerance, all pieces are fitting the base without issues.
For better results, I recommend to use 'Color Painting' in your Slicer to make the puzzles bi-colored - here you have the screen from example how I made it:
- in my case, black layer is around 1mm thin (puzzle piece's height is 5 mm)
And the results:
Print should be fine with standard settings however here you can find some specs I used in example from photos - you can consider to use some of them :)
- Diameter 0.4
- PLA filament (basic or silk)
- Layer height 0.15
- Line width for Top Surfaces 0.35
- Arachne Wall generator
- Minimum wall width 70%
- Monotonic Patterns (both Top and Bottom)
- + For Silk filament, I recommend to decrease speed:
- Outer wall = 70 mm/s
- Inner wall = 100 mm/s
- Top surface = 100 mm/s
- Gap infill = 150 mm/s
- + For base, I used Fuzzy Skin = Contour
Enjoy !