Logic Puzzle various shapes - level intermediate - Brain teaser

The puzzles are very simple to print, no support is needed.

Thanks to some tolerance, all pieces are fitting the base without issues. 

For better results, I recommend to use 'Color Painting' in your Slicer to make the puzzles bi-colored - here you have the screen from example how I made it:

• in my case, black layer is around 1mm thin (puzzle piece's height is 5 mm)

And the results:

Print should be fine with standard settings however here you can find some specs I used in example from photos - you can consider to use some of them :)

• Diameter 0.4
• PLA filament (basic or silk)
• Layer height 0.15
• Line width for Top Surfaces 0.35
• Arachne Wall generator
• Minimum wall width 70%
• Monotonic Patterns (both Top and Bottom)
• + For Silk filament, I recommend to decrease speed:
  • Outer wall = 70 mm/s
  • Inner wall = 100 mm/s
  • Top surface = 100 mm/s
  • Gap infill = 150 mm/s 
• + For base, I used Fuzzy Skin = Contour

Enjoy !