1 / 1
Einpressaufhänger für Holz / press-in suspension fitting for wood — zdjęcie 1

Einpressaufhänger für Holz / press-in suspension fitting for wood

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a press-in fitting to easily hang a wooden plate / board etc. onto the wall

Ocena
0 / 5
Polubienia
3
Pobrania
7
Wydruki
1
Wyświetlenia
49
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Einfacher Einpreßaufhänger ähnlich den in manchen Schränken verbauten Teilen. Ausdrucken, die Stützen innen wegbrechen. Bei den hier gedruckten Exemplaren hat PLA vollkommen ausgereicht.

In die gewünschte Holzplatte eine 12mm tiefe Bohrung mit einem 25mm-Forstnerbohrer machen, dann den Halter passend ausrichten und mit einem Schraubstock o.ä. einpressen. Funktioniert super bei Preßspan und Weichholz. Für Hartholz weniger geeignet.

--------------------

Simple press-in hanger similar to the parts installed in some cabinets. Print it out and break off the supports on the inside. PLA was perfectly adequate in my case.

Drill a 12 mm deep hole in the desired wood panel using a 25 mm Forstner drill bit, then align the holder and press it in using a vice or similar tool. Works great with chipboard and softwood. Less suitable for hardwood.

Tagi