1 / 1
Einpressaufhänger für Holz / press-in suspension fitting for wood — image 1

Einpressaufhänger für Holz / press-in suspension fitting for wood

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

a press-in fitting to easily hang a wooden plate / board etc. onto the wall

Rating
0 / 5
Likes
3
Downloads
7
Makes
1
Views
49
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Einfacher Einpreßaufhänger ähnlich den in manchen Schränken verbauten Teilen. Ausdrucken, die Stützen innen wegbrechen. Bei den hier gedruckten Exemplaren hat PLA vollkommen ausgereicht.

In die gewünschte Holzplatte eine 12mm tiefe Bohrung mit einem 25mm-Forstnerbohrer machen, dann den Halter passend ausrichten und mit einem Schraubstock o.ä. einpressen. Funktioniert super bei Preßspan und Weichholz. Für Hartholz weniger geeignet.

--------------------

Simple press-in hanger similar to the parts installed in some cabinets. Print it out and break off the supports on the inside. PLA was perfectly adequate in my case.

Drill a 12 mm deep hole in the desired wood panel using a 25 mm Forstner drill bit, then align the holder and press it in using a vice or similar tool. Works great with chipboard and softwood. Less suitable for hardwood.

Tags