1 / 3
Fractal North XL Headphone Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for headphones adapted to mount to the Fractal North XL
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original was designed for the XM5 but as you can see in the photos it fits other headphones just fine (pictured is Sennheiser HD660S2).
Printed in with Bambu PLA Metal and 0.6 nozzle. Uses M4 20mm screws and M4 6mm inserts.
Print settings used:
- 0.3mm layers
- 40% gyroid infill
- No supports
Main body was printed flat side down, legs were printed on their sides (any of the 4 long sides will work).
Assembly:
- Attach heat set inserts onto the main body
- Screw the M4 fasteners onto the legs until there's enough threads for it to screw into the main body
- Align the legs with the feet facing down and tighten down the screws all the way in
You may have to print legs 0.3-0.5% less wide if it doesn't fit in between the wooden slats on your North XL, mine is a tight fit as is.