1 / 3
Fractal North XL Headphone Holder — image 1
1 / 3

Fractal North XL Headphone Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holder for headphones adapted to mount to the Fractal North XL

Rating
0 / 5
Likes
9
Downloads
51
Makes
0
Views
384
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The original was designed for the XM5 but as you can see in the photos it fits other headphones just fine (pictured is Sennheiser HD660S2).

Printed in with Bambu PLA Metal and 0.6 nozzle. Uses M4 20mm screws and M4 6mm inserts.

Print settings used:

  • 0.3mm layers
  • 40% gyroid infill
  • No supports

Main body was printed flat side down, legs were printed on their sides (any of the 4 long sides will work). 

Assembly:

  1. Attach heat set inserts onto the main body
  2. Screw the M4 fasteners onto the legs until there's enough threads for it to screw into the main body
  3. Align the legs with the feet facing down and tighten down the screws all the way in

You may have to print legs 0.3-0.5% less wide if it doesn't fit in between the wooden slats on your North XL, mine is a tight fit as is.

Tags