1 / 3
9-to-10mm QR Bike Axle to Dropout Spacer & Solid Axle Adapter — zdjęcie 1
1 / 3

9-to-10mm QR Bike Axle to Dropout Spacer & Solid Axle Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Axle Spacer and/or Solid Adapter for 9mm QR axle to 10mm dropout. Takes up any free play between the two axles.

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
107
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

UPDATE #2 (Q4 2026)

My kid thrashed his 20" bike all year with the full 10mm axle adapter. Literally zero issues. Probably 100 hours of riding time. PAHT-CF for the win. It's tough, creep doesn't matter. Nowhere for it to go, inside the hub, so things stay aligned. The QR axle pinches the fork ends to the endcaps, and then the bearings anyway. Basically the adapter just fills in the gaps. It worked much better than I expected. Print and run with confidence.

UPDATE:

I've added a FULL 5mm QR skewer to 10mm dropout/15mm thru axle adapter. I HIGHLY recommend PAHT-CF. Or PA12-CF.  

Fine Print:

  • This is UNTESTED (the full axle adapter). Print 100% Infill! Print in HIGH strength filament or EXCELLENT layer adhesion such as PA, PA6, PA12 or PPS-CF. I'm on the fence about PA because it absorbs moisture, expands, contracts, and could change the axle tightness. But PAHT-CF does not absorb too much in overall weight (~2-3%)

  • I have printed and installed the axle in PAHT-CF. And it works. And feels tough (can bend without breaking). Axle feels firmly in place. 

  • You or your kids life is at stake here, DO NOT skimp on the infill. I do not take ANY responsibility or ANY liability for injuries or death related to you using my models.

Original Post:

A simple Bike Axle Spacer for 9mm QR axle to 10mm dropout. Not perfect (can crack) but takes up any free play between the two surfaces. A split version is available to prevent cracks. 

I used it to upsize my sons Spawn Yama Jama 15-9mm QR adapter to the 10mm dropout on a trailcraft TC30 fork (think Spawn Brood, Prevelo Heir, etc.). One of them cracked on installation but still stayed in place to take up the space and create a more rigid connection between axle and fork. Until I can source a 15mm-10mm adapter. Can play with the scale to prevent the cracking, if the 9mm portion is oversized in your case.

My son rode the bike park with it on his 20" bike just fine. It got us out of the house and the fork flex/play feels normal. It is stable and will get you rolling!

Print Settings:

I printed in Sirayatech PET-GF (300C Nozz/80C Bed), dried filament, 1 wall (all you can fit!). Back Seams. Iron all solid layers. Recommend 0.6 Nozzle as I only had a 0.4. Also recommend PA or PA6 for durability. The SPLIT version would be more ideal using PA or PA6 so as it shrinks it doesn't tighten around the 9mm OD. Use ARACHNE wall generation to maximize your wall thickness!

Tagi