8mm led strip holder modular, snatch fit modules with difuser (minimalistic)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
8mm led strip holder modular, snatch fit modules with difuser (minimalistic)
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 300
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a 8mm led holder because the glue of this strip bands not last very much with heat.
Minimalistic design, snatch fit assembly. You can join as many modules you want.
Print Settings / Disclamer
You need to adjust your flow to have a good fit.
To much flow → parts hard to fit
Underextrusion → Parts loose
It's okay if your printer has a bit of overextrusion in small areas, but your perimeters needs to be with proper flow.
- 2 Perimeters
- Minimum PETG material
For the led difuser
- Transparent PETG
- Slow speed, print fan off the first 3 layers.
- 1.25 flow multiplier to achieve good transparency
For print orientation check the photo.
How to assemble
Use the joiners to join parts.
The cable holder need an M3x8mm SHCS or whatever you have, but Metric 3.
Endlink are intended to finish the led bar without anything more attached.
Endlink cable holder are intended to fit cables
use the cable holder to fix in place the cables.
Use the joiners to join 220mm modules
The difussers are clip in.